Specifications

Remote-Control CommandsGPS and Assisted GPS
126Operating Manual 1171.5248.12 ─ 15
[:SOURce<hw>]:BB:GPS:ADGeneration:SCOunt <Scount>
Sets the Number of satellites for which the assistance data will be generate.
Note: Configuration of eight satellites is only possible for two path instruments.
Parameters:
<Scount> float
Range: 1 to 9
*RST: 1
Example:
BB:GPS:BAB:STAT ON
enables configuration of 8 satellites
BB:GPS:ADG:SCO 7
sets the number of satellites for which assistance data will be gen-
erate to 7
Options: R&S SMx/AMU-K65
[:SOURce<hw>]:BB:GPS:ADGeneration:SYNChronize
Synchronies the "assisted" satellites with GPS satellites.
Example:
BB:GPS:ADG:SYNC
synchronies the "assisted" satellites with GPS satellites
Usage: Event
Options: R&S SMx/AMU-K65
[:SOURce<hw>]:BB:GPS:ADGeneration:TIME <Time>
Sets the starting time and date of the assistance data as GPS TOW (Time of Week).
Parameters:
<Time> float
Range: -604800 to 604800
Increment: 1
*RST: 0
Example:
BB:GPS:ADG:TIME 1500
sets the time of assistance data
Options: R&S SMx/AMU-K65
[:SOURce<hw>]:BB:GPS:ADGeneration:UTC:CREate <Create>
Stores the current assistance data settings into the selected UTC file. The directory is set
using command MMEM:CDIRectory. A path can also be specified, in which case the
files in the specified directory are read. Only the file name has to be entered. Assistance
data settings are stored as UTC file with the specific file extensions *.rs_utc.
Assistance Data Settings