Specifications

Remote-Control CommandsGPS and Assisted GPS
133Operating Manual 1171.5248.12 ─ 15
Example:
BB:GPS:TRIG:SOUR INT
sets internal triggering.
BB:GPS:TRIG:SEQ ARET
sets "Armed_Retrigger" mode, i.e. every trigger event causes sig-
nal generation to restart.
BB:GPS:TRIG:EXEC
executes a trigger, signal generation is started.
BB:GPS:TRIG:ARM:EXEC
signal generation is stopped.
BB:GPS:TRIG:EXEC
executes a trigger, signal generation is started again.
Usage: Event
[:SOURce<hw>]:BB:GPS:TRIGger:EXTernal:SYNChronize:OUTPut <Output>
(enabled for "Trigger Source" External)
Enables/disables output of the signal synchronous to the external trigger event.
See also "Sync. Output to External Trigger" on page 67 for a detailed description of the
applications of this parameter.
Parameters:
<Output> 0 | 1 | OFF | ON
ON
The signal calculation starts simultaneously with the external trig-
ger event but because of the instrument's processing time the first
samples are cut off and no signal is outputted. After elapsing of
the internal processing time, the output signal is synchronous to
the trigger event.
OFF
The signal output begins after elapsing of the processing time and
starts with sample 0, i.e. the complete signal is outputted.
*RST: ON
Example:
BB:GPS:TRIG:SOUR EXT
sets external triggering.
BB:GPS:TRIG:EXT:SYNC:OUTP ON
enables synchrounous output to external trigger.
[:SOURce<hw>]:BB:GPS:TRIGger:OBASeband:DELay <Delay>
Specifies the trigger delay (expressed as a number of chips) for triggering by the trigger
signal from the second path.
Parameters:
<Delay> float
Range: 0 to 2^32-1
Increment: 1 chip
*RST: 0 chips
Trigger Settings