Specifications

User InterfaceGPS and Assisted GPS
26Operating Manual 1171.5248.12 ─ 15
3 User Interface
To access the dialog for setting the GPS digital standard, select "Baseband block > Sat-
ellite Navigation > GPS" or use the MENU key under "Baseband".
The dialog is split into several sections for configuring the standard. The choice of sim-
ulation mode determines which displays and parameters are made available in the lower
section.
The upper section of the menu is where the GPS digital standard is enabled, the default
settings are called and the simulation mode is selected. Buttons lead to the submenus
for loading and saving the GPS configuration.
Buttons lead to the submenus for configuring the trigger and clock parameters.
The "Localization Mode" menu section is where the satellite signals is configured corre-
sponding to a 'real' location which can be selected by the user
The "Navigation Data" menu section is where the data source for navigation information
is selected and the data indicated (in case of real navigation data).