Specifications

User InterfaceGPS and Assisted GPS
46Operating Manual 1171.5248.12 ─ 15
where f
L1
=1,575420GHz and f
L2
=1,2276MHz as set with parameter RF Band and f
P
is
fixed to 10.230 MHz.
SCPI command:
[:SOURce<hw>]:BB:GPS:SATellite<st>:PCRate on page 96
3.3 Navigation Message Configuration
The "Navigation Message Configuration" dialog is enabled only for "Localization" mode
set to "Full Configuration".
The parameters of the Navigation Message are only configurable for instrument equipped
with option Assisted GPS (R&S SMx/AMU-K65).
In the "Navigation Message Configuration" dialog, the navigation message of each sat-
ellite is displayed.
The menu comprises the sections "Ephemeris and Clock Correction Parameters", "UTC
Parameters", "Ionospheric Parameters" and some "Miscellaneous Parameters", where
the corresponding parameters are displayed.
Although the navigation messages are fully configurable, it is recommended to use the
almanac's parameter as basis for further configurations (see "Set To Alma-
nac" on page 48).
For better readability of the parameters in the "Navigation Message Configuration" menu,
the corresponding values are input as integer in the same way as they are included in
the satellite's navigation message, but the scaled values and the scaling factors are also
displayed.
Navigation Message Configuration