Specifications

User InterfaceGPS and Assisted GPS
53Operating Manual 1171.5248.12 ─ 15
The lower part of the menu offers assistance in the generation of the "Almanac", "Iono-
spheric", "Navigation", "UTC" and "Acquisition" files.
Synchronize
Synchronizes the parameters of the satellites configuration and of the reference location
configuration blocks as well as the parameter "Time of Assistance Data" with the settings
made in the "Satellite Configuration" dialog and in the Main Dialog.
SCPI command:
[:SOURce<hw>]:BB:GPS:ADGeneration:SYNChronize on page 126
Number Of Satellites
Sets the number of satellites for which the assistance data will be generate.
SCPI command:
[:SOURce<hw>]:BB:GPS:ADGeneration:SCOunt on page 126
SV ID 1 .. 9
Sets the ID for the corresponding satellite (space vehicle) for which the assistance data
will be generate.
SCPI command:
[:SOURce<hw>]:BB:GPS:ADGeneration:SATellite<st>:SVID on page 125
Position Format (Assistance Data Generation)
Sets the format in which the Latitude and Longitude are displayed.
"DEG:MIN:SE
C"
The display format is Degree:Minute:Second and Direction, i.e.
XX°XX'XX.XX" Direction,
where direction can be North/South and East/West.
"Decimal
Degree"
The display format is decimal degree, i.e.
+/-XX.XXXXX°,
where "+" indicates North and East and
"-" indicates South and West
SCPI command:
[:SOURce<hw>]:BB:GPS:ADGeneration:LOCation:PFORmat on page 123
Assistance Data Generation