Specifications

User InterfaceGPS and Assisted GPS
62Operating Manual 1171.5248.12 ─ 15
SCPI command:
[:SOURce<hw>]:BB:GPS:RLOCation:ALTitude on page 127
[:SOURce<hw>]:BB:GPS:RLOCation:LATitude on page 128
[:SOURce<hw>]:BB:GPS:RLOCation:LONGitude on page 130
[:SOURce<hw>]:BB:GPS:RLOCation:LATitude:DEGRees on page 128
[:SOURce<hw>]:BB:GPS:RLOCation:LATitude:MINutes on page 129
[:SOURce<hw>]:BB:GPS:RLOCation:LATitude:SEConds on page 129
[:SOURce<hw>]:BB:GPS:RLOCation:LATitude:DIRection on page 129
[:SOURce<hw>]:BB:GPS:RLOCation:LONGitude:DEGRees on page 130
[:SOURce<hw>]:BB:GPS:RLOCation:LONGitude:MINutes on page 131
[:SOURce<hw>]:BB:GPS:RLOCation:LONGitude:SEConds on page 131
[:SOURce<hw>]:BB:GPS:RLOCation:LONGitude:DIRection on page 130
HDOP / PDOP
Displays the current HDOP and PDOP value of the selected satellite constellation.
The HDOP (Horizontal Dilution of Precision) can be used as an indication of 2D posi-
tioning quality.
The PDOP (Position Dilution of Precision) can be used as an indication of 3D positioning
quality.
The general rule here is that the smaller the HDOP and PDOP are, the better the precision
of the position fix will be.
SCPI command:
n.a.
Get Next Handover Time
(enabled for "Auto SV Selection and Updated" mode)
Displays the expected time of the upcoming satellites handover.
The time is expressed as a time offset (in seconds) to the beginning of the simulation set
with the parameter GPS Mean Time.
SCPI command:
[:SOURce<hw>]:BB:GPS:SPOT:NHOTime on page 127
3.5.2 Reference Location
In the "Reference Location" section the reference location can be configured.
Position Format (S.P.O.T.)
Sets the format in which the Latitude and Longitude are displayed.
Real-Time S.P.O.T.