Specifications

User InterfaceGPS and Assisted GPS
63Operating Manual 1171.5248.12 ─ 15
The Position Format selected heir changes the format theReceiver Location is displayed.
"DEG:MIN:SE
C"
The display format is Degree:Minute:Second and Direction, i.e.
XX°XX'XX.XX" Direction,
where Direction can be North/South and East/West.
"Decimal
Degree"
The display format is decimal degree, i.e.
+/-XX.XXXXX°,
where "+" indicates North and East and
"-" indicates South and West.
SCPI command:
n.a.
Latitude (S.P.O.T.)
Sets the latitude of the receiver location.
For static receivers, the initial value is automatically set to the latitude of the Geographic
Location selected in the Localization Data section of the main menu.
When simulating moving receivers, the initial value is derived from the waypoints file and
set to the latitude of the first receiver position.
SCPI command:
n.a.
Longitude (S.P.O.T.)
Sets the longitude of the receiver location.
For static receivers, the initial value is automatically set to the longitude of the Geographic
Location selected in the Localization Data section of the main menu.
When simulating moving receivers, the initial value is derived from the waypoints file and
set to the longitude of the first receiver position.
SCPI command:
n.a.
Deviation
Sets the deviation in terms of meters from the Reference Location and determines the
radius of the "Map View" display.
SCPI command:
n.a.
3.6 Trigger/Marker/Clock Settings
The trigger, clock, and marker delay functions are available for R&S SMx and R&S AMU
instruments only.
To access this dialog, select "Main Menu > Trigger/Marker".
Trigger/Marker/Clock Settings