Specifications

User InterfaceGPS and Assisted GPS
64Operating Manual 1171.5248.12 ─ 15
The "Trigger In" section is where the trigger for the signal is set. Various parameters will
be provided for the settings, depending on which trigger source - internal or external - is
selected. The current status of signal generation ("Running" or "Stopped") is indicated
for all trigger modes.
The "Marker Mode" section is where the marker signals at the MARKER output connec-
tors are configured.
The "Marker Delay" section is where a marker signal delay can be defined, either without
restriction or restricted to the dynamic section, i.e., the section in which it is possible to
make settings without restarting signal and marker generation.
The "Clock Settings" section is where the clock source is selected and - in the case of an
external source - the clock type.
The buttons in the last section lead to submenu for general trigger, clock and mapping
settings.
Trigger/Marker/Clock Settings