Specifications

Remote-Control CommandsGPS and Assisted GPS
80Operating Manual 1171.5248.12 ─ 15
Sets the format in which the Latitude and Longitude are displayed. According to this
parameter, the position can be specified in "DEG:MIN:SEC" or in "Decimal Degree" for-
mat.
Parameters:
<Pformat> DMS | DECimal
DMS
The position is specified in DEG:MIN:SEC.
DECimal
The position is specified in decimal degree, i.e. +/-XX.XXXXX°,
where "+" indicates North and East and "-" indicates South and
West.
Example:
BB:GPS:LOC:PFOR DMS
position is specified in format DEG:MIN:SEC
[:
SOURce<hw>]:BB:GPS:LOCation:ROMode <Romode>
(R&S SMx/AMU instruments only)
Defines the way the waypoint file is to be read.
Parameters:
<Romode> CYCLic | RTRip | OWAY
CYCLic
The waypoint file is read out cyclic.
Using this read out mode is recommended only for waypoint files
that describe a circle moving scenario or moving scenario in which
the start and the end point are close to each other.
OWAY
The file is read out only once.
By reaching the end of the file, the last described position is
assumed to be a static one.
RTRip
By reaching the end of the file, the file is read out backwards.
*RST:
OWAY
Example:
BB:GPS:LOC:ROM CYCL
the waypoint file will be read out cyclic.
[:SOURce<hw>]:BB:GPS:LOCation:WAYPoints <Waypoints>
(R&S SMx/AMU instruments only)
Selects the waypoint file. A waypoint file must have the extension *.txt.
See "Waypoint file's format" for detailed description of the waypoint file's format.
Parameters:
<Waypoints> string
Primary Settings