Specifications

Remote-Control CommandsGPS and Assisted GPS
82Operating Manual 1171.5248.12 ─ 15
Parameters:
<Semask> 2.5 | 5 | 7.5 |
10 (only for instruments working in a coupling mode)
*RST: 7.5
Example:
BB:GPS:BAB:STAT ON
enables control of both paths via the GPS menu of path A. 8 Sat-
ellites can be configured.
BB:GPS:SEM 10
sets the satellite eleation mask.
[:SOURce<hw>]:BB:GPS:SETTing:CATalog?
Reads out the files with GPS settings in the default directory. The default directory is set
using command MMEM:CDIRectory. Only files with the file extension *.gps will be
listed.
Return values:
<Catalog> string
Example:
MMEM:CDIR 'D:\user\gps
sets the default directory to D:\user\gps.
BB:GPS:SETT:CAT?
reads out all the files with GPS settings in the default directory.
Response: 'gps_generic','gps_gen2'
the files gps_generic and gps_gen2 are available.
Usage: Query only
[:SOURce<hw>]:BB:GPS:SETTing:DELete <Delete>
Deletes the selected file with GPS settings. The directory is set using command
MMEM:CDIRectory. A path can also be specified, in which case the files in the specified
directory are read. The file extension may be omitted. Only files with the file extension
*.gps will be deleted.
Setting parameters:
<Delete> string
Example:
BB:GPS:SETT:DEL 'gps'
deletes file gps.
Usage: Setting only
[:SOURce<hw>]:BB:GPS:SETTing:LOAD <Load>
Loads the selected file with GPS settings. The directory is set using command
MMEM:CDIRectory. A path can also be specified, in which case the files in the specified
directory are read. The file extension may be omitted. Only files with the file extension
*.gps will be loaded.
Primary Settings