Specifications

Remote-Control CommandsGPS and Assisted GPS
83Operating Manual 1171.5248.12 ─ 15
Setting parameters:
<Load> string
Example:
BB:GPS:SETT:LOAD 'gps'
loads file gps.
Usage: Setting only
[:SOURce<hw>]:BB:GPS:SETTing:STORe <Store>
Stores the current GPS settings into the selected file. The directory is set using command
MMEM:CDIRectory. A path can also be specified, in which case the files in the specified
directory are read. Only the file name has to be entered. GPS settings are stored as files
with the specific file extensions *.gps.
Setting parameters:
<Store> string
Example:
BB:GPS:SETT:STOR 'gps_sem299'
stores the current settings into file gps_sem299.
Usage: Setting only
[:SOURce<hw>]:BB:GPS:SETTing:STORe:FAST <Fast>
Determines whether the instrument performs an absolute or a differential storing of the
settings.
Enable this function to accelerate the saving process by saving only the settings with
values different to the default ones.
Note: This function is not affected by the "Preset" function.
Parameters:
<Fast> 0 | 1 | OFF | ON
*RST: 1
[:SOURce<hw>]:BB:GPS:SMODe <Smode>
Sets the simulation mode.
Parameters:
<Smode> GENeric | LOCalization
*RST: GENeric
Example:
BB:GPS:SMOD GEN
generic satellite signals are generated.
[:SOURce<hw>]:BB:GPS:STATe <State>
Activates the signal generation of simulated GPS satellites.
Primary Settings