Specification

Specifications: BC002 • Issue Date May 2014
2400 7th Avenue S.W · Cullman · Alabama 35055 · USA · www.cashacme.com
US Contact: 1-877-700-4242 · [e-mail] · Canadian Contact: 1-888-820-0120 · [e-mail]
A Division of Reliance Worldwide Corporation
F-82 Safety Relief Valve
DESCRIPTION
The Cash Acme F-82 is a pressure-only ASME safety relief valve designed for use on hot
water space heating boilers, water supply heaters and storage tanks.
The Cash Acme F-82 Safety Relief Valves are designed for use on hot water service only and
are not to be used on steam. The Cash Acme F-82 is available in 3/4", 1", 1-1/4", 1-1/2" and 2"
sizes. All sizes have a female inlet and outlet. The 3/4" size is also available with a male inlet.
The Cash Acme F-82 ASME Safety Relief Valves have a standard factory pressure relief
setting from 30 to 150 psi. These high capacity pressure-only safety relief valves feature
bronze bodies, silicone seat discs, EP diaphragms, brass internal parts, and stainless steel
pressure springs.
Lead Free* versions of most models are also available.
FEATURES AND BENEFITS
Compact and economical:
Saves space and money!
Completely automatic and reseats after pressure relief:
Ideal for most domestic water heater applications.
ASME Section IV listed:
Rated for emergency steam discharge by the National Board
of Boiler and Pressure Vessel Inspectors.
Every valve is tested for performance prior to shipping:
Specify and install with confidence!
SPECIFICATION
A high capacity safety relief valve shall be installed to relieve pressure at a pre-determined set.
The valve shall have a bronze body with a silicone seat disc and stainless steel pressure
spring. The valve shall be ASME listed and National Board Certified. The valve shall be a Cash
Acme F-82.
* A device is defined as Lead Free if its normally wetted surface has a weighted average lead
content not exceeding 0.25%.