Specification

US 1 877 700 4242 | [e-mail] | cashacme.com
Canada 1 888 820 0120 | [e-mail] | cashacme.ca
Specication Sheet
Mixing Valve
CAH110D0621
EN-US
CashAcme
TM
HG 110-D Mixing Valve
The Heatguard
TM
110-D is a Temperature Actuated Mixing
Valve that mixes hot water with cold to deliver tempered
water at a controlled temperature to 120°F (49°C) maximum.
BIM Available Online
Approved Applications
• Domestic and Commercial hot water distribution.
This information is proprietary to RWC and is subject to change without notice. It may not be reproduced in part or whole without written authorization.
Name
Date
Architect/Owner
Product Submittal
Contractor
Tag
Notes
Specication Data
Performance
Adj. Outlet Temperature Range 85 – 130°F (29 – 54°C)
Factory Set and Locked 120°F (49°C)
Temperature Hot Supply 120 – 180°F (48.9 – 82.2°C)
Temperature Cold Supply 39–80°F(3.9–26.7°C)
Maximum Pressure 230 psi* (1600 kPa)
Flow Rate, Minimum 1 GPM (3.8l/Min)
Flow Rate, Maximum (@ 60 psi) 20 GPM (53 l/min)
*200 psi (1379 kPa) when using with SharkBite connections.
Materials
Body Lead-Free DZR Brass
1
Seals EPDM
Springs Stainless Steel
Internal Cap Brass
Piston Engineered Polymer
A
D
B
C
E
F
Dimensions (inches)
Size Connections Ends Part A B C D E
½" Sweat 24501 4.79 4.74 2.65 3.07 1.91
¾" Sweat 24502 5.17 4.91 2.84 3.07 1.91
1" Sweat 24503 7.57 6.13 4.04 3.07 1.91
½" SharkBite Union 24504 6.12 5.41 3.31 3.07 1.91
¾" SharkBite Union 24505 6.47 5.58 3.49 3.07 1.91
½" Barb (PEX) 24506 5.29 4.99 2.90 3.07 1.91
¾" Barb (PEX) 24507 5.29 4.99 2.90 3.07 1.91
½" CPVC 24508 6.92 5.81 3.71 3.07 1.91
¾" CPVC 24509 6.93 5.81 3.72 3.07 1.91
½" Threaded NPT 24510 5.68 5.17 3.09 3.07 1.91
¾" Threaded NPT 24511 6.19 5.42 3.35 3.07 1.91
½" Direct SharkBite 24548 5.94 5.36 3.27 4.08 2.34
¾" Direct SharkBite 24549 5.89 5.34 3.24 4.08 2.34
½” Cold Expansion 25948 5.55 5.01 3.03 3.07 1.91
¾” Cold Expansion 25949 6.01 5.24 3.26 3.07 1.91
Flow Curve
Codes & Standards
The Cash Acme Heatguard 110-D is certied to ASSE 1017,
ASSE 1069, ASSE 1070/ASME A112.1070/CSA B125.70, CSA
B125.3, NSF/ANSI 372, NSF/ANSI/CAN 61 and listed byIAPMO,
ASSE, and CSA for use in accordance with U.S. and Canadian
plumbing codes.
Pressure Loss - PSI
5 10 15
20
Flow Rate-GPM
0
10
20
30
40
50
0
1
For all models, surfaces that are in contact with consumable water contain less
than 0.25% lead by weight.