Installation Guide

ManualsBrandsCashel ManualsPlumbing20.5 in. x 25.75 in. x 35.25 in. Polypropylene Free Standing Sink The Fitz Workstation - Fully Loaded Sink Kit

Part No. IN00006 REV D 0/0

Herramientas que necesitará

Outils requis

Kit includes:

• One Utility Sink

• One Faucet Assembly

• Two Supply Lines

• One Drain Installation Kit

• One Basket Strainer

El conjunto incluye:

• Un fregadero de servicio

• Un juego de grifos

• Dos cañerías de suministro de agua

• Un juego de instalación de drenajes

La trousse comprend:

• Un évier de service

• Un ensemble de robinet

• Deux conduites d’alimentation

• Une trousse d’installation de drain

• Une crépine-panier

Required:

Adjustable wrench

Groove joint plier

Pipe wrench

Phillips screwdriver

Silicone

Indispensables:

Llave inglesa

Alicate de extensión

Llave para tubos

Destornillador de estrella

Silicona

Outils obligatoires :

Clé ajustable

Pince multiprise

Clé à tuyau

Tournevis Phillips

Silicone

Helpful:

Basin wrench

Hacksaw

Pipe wrench

Utility knife

Útiles:

Llave de fregadero

Sierra para metales

Llave para tubos

Cuchillo

Outils utiles :

Clé à robinet

Scie à métaux

Clé à tuyau

Couteau universel

Tools you may need

Model No./N° de Modelo/N° de Modèle:

Before installing your Utility Sink Kit

Antes de instalar el paquete de la fregadero utilitaria:

Avant d’installer votre évier utilitaire:

• Read all instructions completely before beginning installation.

• Check all local plumbing codes.

• Be sure to shut off water at source and remove all old plumbing, if existing.

• Antes de comenzar la instalación, lea las instrucciones con detenimiento.

• Consulte todos los reglamentos de plomería locales.

• Asegúrese de cerrar la llave de paso general de agua y quitar toda la plomería vieja, si existiera.

• Veuillez lire toutes les instructions avant de commencer l’installation.

•

• Assurez-vous de couper l’alimentation d’eau à la source et retirez toutes les pièces de plomberie

existantes, au besoin.

For additional help please visit www.CashelLLC.com,

email customerservice@CashelLLC.com or call

Por ayuda adicional, por favor visite www.CashelLLC.com, mande un email a

customerservice@CashelLLC.com o llame al

Pour obtenir de l’aide supplémentaire, visitez le site www.CashelLLC.com,

faites parvenir un courriel à customerservice@CashelLLC.com ou composez

Installing your Utility Sink

1950,1960,1980 and 1990

1-610-306-0433

Part No. IN0616 V2 06/16

Summary of content (5 pages)

PAGE 1
Installing your Utility Sink Model No./N° de Modelo/N° de Modèle: 1950,1960,1980 and 1990 Kit includes: EN EN • One Utility Sink • Read all instructions completely before beginning installation. • Check all local plumbing codes. • Be sure to shut off water at source and remove all old plumbing, if existing. • One Faucet Assembly • Two Supply Lines • One Drain Installation Kit • One Basket Strainer El conjunto incluye: • Un fregadero de servicio For additional help please visit www.CashelLLC.com, .
PAGE 2
FOR THE 1990 FITZ UTILITYSINK SINK FIT UTILITY FOR THE 1980 MADDOX 103090 HAVEN UTILITY SINK SINK: La fregadero utilitaria, Bastidor, Ganchos y la Repisa L’evier utilitarie y La Repisa L’evier utilitarie, Cantonniere, Crochets et Tablette La tina utilitaria et Tablette The Utility Sink, Valance, Hooks & Shelf The Utility Sink & Shelf 1. Place the sink upside down on a smooth elevated surface such as 2x4’s or blocks to protect the backsplash on the sink.
PAGE 3
THE 1950 STANDARD & 1960 HEAVY DUTY FOR SINKS 103001 & 101040: FOR ALL SINKS: La fregadero utilitaria El paquete de instalación del desagüe L’evier utilitarie Kit d’installation du drain The Utility Sink The Drain Installation Kit A F B A C E Preparation: 1. Shut off water at source, drain sink and have a pail or pan ready to catch water remaining in p-trap. 2. Loosen old connections from wall pipe and save nut (A) and washer (B). 1. Locate the faucet knockouts (A) on the utility sink.
PAGE 4
FOR THE 1990-32, 1980-32, 1960-32 103001, 103090 & 102085: FOR THE 1950-31 101040: Grifería y líneas de suministro Grifería y líneas de suministro Conduites du robinet et d’arrivée Conduites du robinet et d’arrivée The Faucet & Supply Lines The Faucet & Supply Lines STANDARD TUB TINA ESTÁNDAR ÉVIER STANDARD HEAVY-DUTY TUB TINA INDUSTRIAL ÉVIER DE HAUTE CAPACITÉ A A C P D D B D R D M 14” (356mm) Min. S T C B E E E F E F 1. Position faucet on sink (A). Hand tighten locknuts (B). 2.
PAGE 5
For All FOR ALLSinks: SINKS G LIMITED WARRANTY CASHEL warrants to the original consumer purchaser that its products will be free of defects in materials and workmanship, subject to the limitations, exclusions and conditions that follow, for 1 year from date of original purchase as shown on purchaser’s receipt.