User's Manual

E-62

Important !

Never short out the power contacts of the Cradle-type Dual Battery Charger.

This can damage the Cradle-type Dual Battery Charger.

Allowing the power contacts become wet can cause an electric shock or ﬁ re. In

addition, if the contacts become soiled, contact may be impaired resulting in

poor charging. For reasons of safety and maintaining charging battery pack(s)

in optimum condition, clean the power contacts by wiping with a dry cloth or

cotton swab after disconnecting the AC adaptor.

When placing DT-X7 with the Hand Belt (HA-F95HB) attached in the charger,

loosen the belt beforehand to ensure that it does not become an obstruction.

Check the Indicator 1 on the DT-X7 to ensure that the DT-X7 is securely

positioned in the charger. The indicator will light up in orange for correct

positioning.

Each unit of the charger comes with one piece each of the side and bottom brackets.

After you join two chargers together using these two brackets, one side bracket and

one bottom bracket will be left over. Keep these as spare for use in future.

Before linking multiple Cradle-type Dual Battery Chargers, be sure to

disconnect the AC adaptor.

Turn off the power on DT-X7 before placing it in the charger.