User's Guide

Introduction (Basic Operation)

The battery is not fully charged at the time of purchase. Use the procedure below to

load the battery into the camera and charge it.

• This camera uses a CASIO dedicated lithium-ion rechargeable battery (DNP-

100M) as its power supply. (Batteries other than the DNP-100M cannot be used.)

1. Open the battery cover.

2. Insert the battery.

Hold the battery so that the CASIO

logo faces down (towards the lens)

and insert the battery so that the

side of the battery shifts the

stopper in the direction of the

arrow. Push the battery in firmly

until the stopper engages with the

battery.

3. Close the battery cover.

After unpacking the product, charge the battery

Inserting the battery

CASIO logo

Stopper

Battery

Back

Front