User's Guide

Introduction (Basic Operation)

The first time you switch the camera on

after purchasing it

A screen for setting the display language,

date & time appears. If you do not set the date &

time, the correct date & time will not be recorded

on photographed images.

1. Press [p] (Power) to switch the

camera on.

2. Set the display language.

Select the language to be displayed in the screens

and tap .

The explanations in this Guide are with the display

language set to “English”.

3. Set the date & time.

Tap the year, month, day, hour, minute or am (or pm)/

24h and then swipe up or down to change the setting.

4. Once you have finished setting the date &

time, tap to complete the settings.

NOTE

• If you set the time and then immediately remove the battery, the set time may be

reset. After setting the time, leave the battery in the camera for at least 24 hours.

Setting the Display Language, Date & Time When You First

Use the Camera

You can change the display language setting. See page 62.

If you set the date or time incorrectly, you cannot correct it using the above

procedure. Refer to page 62 to correct the settings.

[p] (Power)

Adjust