User's Guide

Other Playback Functions

1. Switch off the camera and use a third-party HDMI cable to connect the

camera to the external monitor.

• Use only HDMI cables (third-party) that carry

the logo shown at right.

• Switch the camera off before connecting or

disconnecting the cable. Configure the

external monitor as described in the manual for the monitor before connecting

or disconnecting the cable.

2. Switch the camera on.

The image displayed on the LCD monitor appears on the external monitor.

NOTE

• The HDMI cable used should be less than 3.0 m (9.8') long and should be shielded

and compatible with the HDMI high-speed specification (ver. 1.4).

• The external monitor used should be compliant with the IEC/UL/CSA/EN60950-1

or JIS C 6950-1, or with the VCCI-B, FCC-B or CE standard.

• The use of products that do not comply with the specified standards may result in

lowered resistance to external electromagnetic waves and/or an increase in

unwanted electromagnetic wave emissions.

• External monitors should be kept at least 1.5 m (4.9') away from the patient during

use.

• The touch panel cannot be used while an HDMI cable is connected.

Viewing images on an external monitor

HDMI

HDMI cable

(Less than 3.0 m (9.8'))

HDMI output (micro)

HDMI micro connector

HDMI

connector

HDMI input

External monitor