User's Guide

Appendix

Even during the warranty period, charges will apply to any repairs for faults

caused by damage to camera components such as the lens, LCD monitor or

internal circuit boards where that damage arises from handling errors, such as

external pressure, impacts or being dropped.

During observations and photography, hold the camera grip securely and

take care not to drop it.

Particularly when working above the patient, take care not to drop the

camera onto the patient.

Carefully check the recording mode (NORMAL or DERMO) when taking

pictures to ensure that the mode is correct for the site being

photographed.

Depending on the recording mode, the LED light may be on or off, or may

illuminate a different area. Take care shining the light at other people.

Take particular care not to shine the LED light into other people’s eyes.

Both during normal use and when being replaced, the rechargeable

battery, AC adapter and cables used with the camera must always be the

specified products. The use of other products may lead to faults or

malfunctions.

It may also result in lowered resistance to external electromagnetic waves

and/or an increase in unwanted electromagnetic wave emissions.

Avoid using the camera close to or stacked on top of other equipment.

Doing so could cause a malfunction.

If you notice any unusual odors, overheating, discoloration, distortion or

any other abnormality when using, charging or storing this camera,

immediately stop using the camera. Continued use of the camera could

cause the battery to overheat, rupture or catch fire.

If the battery leaks fluid or emits unusual odors, immediately move it away

from any exposed flame. Otherwise, the leaked electrolyte could ignite

and explode or catch fire.

The AC adaptor for camera charging, HDMI cable and micro USB cable

should be disconnected from the camera when not being used.

When the AC adaptor for camera charging, HDMI cable or micro USB

cable is connected to the camera, avoid applying undue force to the

connector on the camera. Doing so could damage the connector.

User should install an anti-virus, anti-malware or other suitable firewall to

its chosen software system.