User's Manual

Quick Start Basics

Toggling Between the REC Mode and PLAY Mode

 To turn off power

On the camera or the controller, hold down [] (Power).

 Turning off the camera will cause the controller to turn off automatically.

The first time you turn on the camera, a screen appears for configuring the display

language, date, and time settings. Failure to set the date and time correctly will cause

the wrong date and time data to be recorded with images.



 Camera models sold in certain geographic areas may not support display language

selection.

1. Turn on the camera and controller (page 26).

 If this is the first time you are turning on power, a language selection screen will

appear. If the screen does not appear, check to make sure that the camera is

turned on.

2. Flick (page 18) the controller screen upwards and downwards or touch

 ,   until you find the language you want, and then touch to

select it.

3. Touch the date display format you want.

Example: July 10, 2016

YY/MM/DD  16/7/10

DD/MM/YY  10/7/16

MM/DD/YY  7/10/16

To enter the

PLAY mode

In the REC mode, touch   (PLAY).

 If   (PLAY) is not displayed on

the screen, you can touching the

Review image (page 59), or switch

to the PLAY mode by touching

  (Show Icons) and then

touching   (PLAY).

To enter the

REC mode

In the PLAY mode, touch  

(Show Icons). On the screen image

that appears, touch   (REC).

Configuring Basic Settings the First Time You Turn On the

Camera

 

(Show Icons)

Screen after  

(Show Icons) is touched

  (PLAY) /   (REC)