User's Manual

38
Wired LAN Settings Main Menu (USB Port Models Only)
USB Settings Main Menu (USB Port Models Only)
The USB Settings main menu is available only when there is an external device connected to the
USB-A port of the projector. For details, see “USB Function Guide” and “Wireless Function Guide” on
the bundled CD-ROM.
Setting Name Input Setting Unit Description
Remote on
RCVHDUN Single Specifies whether the projector can be turned on via wired LAN
while the projector is in standby (projector off with power being
supplied).
Enable:
Power on enabled.
Disable*:
Power on disabled.
Important!
Initializing wired LAN settings or performing a “Restore All
Defaults” operation with the setup menu will cause this
setting to change to “Disable”. If you are operating the
projector using a wired LAN setting, be sure to change this
setting back to “Enable” after initialization.
PJLink
authentication
RCVHDUN Single Enables and disables PJLink connection authentication.
Enable*:
PJLink connection authentication enabled.
Disable:
PJLink connection authentication disabled.
Wired LAN info
RCVHDUN Single Displays the following information.
Projector name:
Name currently assigned to the projector.
MAC Address:
Fixed MAC address assigned to each individual projector.
IP Address:
Projector’s current IP address.
DHCP:
Projector’s current DHCP setting status (“Auto” or “Disable”).
The projector name, IP address, and DHCP settings can be
configured using the projector System Admin page, which can be
accessed on a computer connected by LAN to the projector. For
details, see the “Wireless Function Guide” on the CD-ROM that
comes with the projector.
Initialize wired
LAN settings
RCVHDUN Single Use this sub-menu to return all of the sub-menu items on the wired
LAN main menu to their initial default settings.