User manual

ManualsBrandsCasio ManualsWatch2204

Module No. 2203/2204/2205

2203/2204/2205-1

GENERAL GUIDE

• Press

C to change from mode to mode.

• Pressing

E in any mode besides the Alarm Mode illuminates to the display for about three seconds. The backlight is disabled while a setting screen is on the display.

• If you do not perform any operation for a few minutes while a setting screen (with flashing digits) is on the display, the watch automatically exits the setting screen.

• If you do not perform any operation for a few minutes in any mode besides stopwatch mode, the watch automatically reverts to the normal timekeeping screen.

Timekeeping Mode Day Counter Mode Alarm Mode Stopwatch Mode

Memo Mode

Press

TIMEKEEPING MODE

Press

D to toggle between 12-hour and 24-hour time-

keeping.

• With 12-hour timekeeping, times between midnight and

noon are indicated by A (am), while times between noon

and midnight are indicated by P (pm).

• The A and P indicators do not appear for 24-hour time-

keeping.

• Pressing

B plays a randomly selected melody. To stop

a playing melody, press any button besides

• Pressing

E while a melody is playing toggles the dis-

play between an animated character and the name of

the melody.

• Press

E to illuminate the display for about three sec-

onds. When 12-hour timekeeping is being used, press-

ing

E also displays an animated character.

Timekeeping Mode Settings

In addition to settings for the current time and date, the Timekeeping Mode setting

screen also lets you turn button tones and melody play on and off, adjust tones and

melody volume, and adjust display contrast.

To make Timekeeping Mode settings

1. While in the Timekeeping Mode, hold down

A until the seconds digits flash on the

display, indicating the setting screen.

2. Press

C to move the flashing in the sequence shown below. Press

E to move the

flashing in the opposite direction.

Seconds DST Hour Minutes Year

Contrast

(CNT)

Volume

(VOL)

Sound

(SOUND)

MonthDay

Press . Press .

3. While the seconds setting is selected (flashing), press

D or

B to reset it to 00.

• If you press

D or

B while the seconds setting is in the

range of 30 to 59, the seconds are reset to 00 and 1 is

added to the minutes. If the seconds setting is in the

range of 00 to 29, the minutes count is unchanged.

• While the DST (Daylight Saving Time) setting is select-

ed, press

D or

B to toggle it on and off.

• DST indicator 1 is displayed in the Timekeeping Mode

setting screen only when the DST setting is selected. It

shows ON when the DST setting is on, and OFF when

the DST setting is off.

• DST indicator 2 is displayed in the Timekeeping Mode,

Day Counter Mode and Alarm Mode when the DST set-

ting is turned on.

• While the SOUND setting is selected, press

D or

B to turn the beep and musical

tone on and off, as shown below.

Beep

Musical tone

Off

Press . Press .

• While the VOL setting is selected, press

D or

B to toggle it between loud and soft.

Loud

Soft

Press or .

• With some models, changing the volume setting affects volume very little.

• While the CNT setting is selected, press

D to make the display darker, or

B to

make it lighter.

• While any other setting is selected (flashing), press

D to increase it or

B to de-

crease it. Holding down either button changes the setting at high speed (except for

the CNT setting).

4. After you make the settings you want, press

A to exit the setting screen.

• The day of the week is automatically set in accordance with the date.

• The date can be set within the range of January 1, 2000 to December 31, 2039.

• The watch's built-in full automatic calendar automatically makes allowances for dif-

ferent month lengths and leap years.

Once you set the date, there should be no reason to change it except after the

replacement of the watch's battery.

Month

Day of week

Day

PM indicator

Hour

Minutes

Seconds

DST indicator 2

DST indicator 1

ABOUT THE BACKLIGHT

Pressing

E in any mode besides the Alarm Mode illuminates the display for about

three seconds. The backlight is disabled while a setting screen is on the display.

• The backlight of this watch employs an electro-luminescent (EL) light, which loses

its illumination power after very long term use.

• Frequent use of the backlight shortens battery life.

• The illumination provided by the backlight may be hard to see when viewed under

direct sunlight.

• The backlight automatically turns off an alarm sounds.

• The watch emits an audible sound whenever the display is illuminated. This does

not indicate malfunction.

DAY COUNTER MODE

Mode indicator

Day counter

record number

Tex t

Number of days

DAYS indicator

Year

Month

Day

Target Date

The Day Counter Mode lets you count the number of days from the Timekeeping

Mode’s current date to a specific target date.

• There are five Day Counter records, each of which can be assigned up to 12 char-

acters of text and a target date.

• When a target date is reached, the DAYS indicator flashes on the display in the

Timekeeping Mode. The DAYS indicator also flashes in the Day Counter Mode

when the screen for the target date is on the display.

• The DAYS indicator flashes on the target date each year, regardless of the year

setting of the target date.

• The initial default date for a Day Counter record is 2001/1/1, and the text area

contains All spaces. (All spaces for the text display a series of hyphens “ – – – – – ”.)

Recalling Day Counter Data

In the Day Counter Mode, press

D to scroll through the Day Counter record screens.

• The day count is a negative value whenever the target date comes before the cur-

rent date.

To set the target date

1. In the Day Counter Mode, press

D to display a record number you want to set.

2. Hold down

A until the first (leftmost) text character starts to flash on the display.

This indicates the input screen.

3. Press

C to move the flashing in the sequence shown below. Press

E to move the

flashing in the opposite direction.

Press . Press .

Character 1

Day

Character 12

YearMonth

4. While the flashing is located within the text area, use

D or

B to scroll through

characters at the current location of the flashing. Holding down either button scrolls

through characters at high speed.

Press . Press .

Space A to Z

Punctuation

Japanese

characters

Hyphen SymbolsNumbers

∗

See the “CHARACTER LIST” for details.

5. While any other setting is selected, press

D to increase it or

B to decrease it.

Holding down either button changes the setting at high speed.

• Pressing

D and

B at the same time while the flashing is located within the text area

clears any input text and resets the date setting to the current date. At this time the

message “CLEAR” appears on the display.

• Pressing

D and

B at the same time while the flashing is located within the date

area resets the date setting to the current date without affecting the text.

6. After you make the settings you want, press

A to exit the input screen.

• The date can be set within the range of January 1, 1940 to December 31, 2039.

Summary of content (3 pages)

PAGE 1
Module No. 2203/2204/2205 2203/2204/2205-1 GENERAL GUIDE • • • • Press C to change from mode to mode. Pressing E in any mode besides the Alarm Mode illuminates to the display for about three seconds. The backlight is disabled while a setting screen is on the display. If you do not perform any operation for a few minutes while a setting screen (with flashing digits) is on the display, the watch automatically exits the setting screen.
PAGE 2
203/2204/2205-2 STOPWATCH MODE ALARM MODE Mode indicator Mode indicator Current time Melody name The stopwatch Mode lets you measure elapsed time, split times, and two finishes. The range of the stopwatch is 23 hours, 59 minutes, 59.99 seconds. You can use the EL backlight by pressing E at any time while the stopwatch is operating. Current time Alarm number Hours Minutes Seconds Hour Minutes 1/100 second You can set up to five melody alarms.
PAGE 3
2203/2204/2205-3 CHARACTER LIST MELODY LIST 2203 1 UFO 2 Koibito ga Santa Claus 3 Akai sweet pea 4 Body feels exit 5 Hi no ataru basho 2204 1 Heart of glass 2 I love rock’n roll 3 Like a virgin 4 Emotions 5 To love you more 2205 1 You can’t hurry love 2 When will I see you again 3 Rhythm nation 4 Creep 5 All that I can say