User manual
Table Of Contents
- Before Getting Started...
- Time Adjustment
- Using Mobile Link with a Mobile Phone
- Getting Ready
- Auto Time Adjustment
- Specifying a Port
- Viewing Training Records
- Viewing Life Log Related Data
- Setting Target Values
- Creating a Training Plan
- Specifying the Alert Interval (Target Alert)
- Specifying the Distance for Auto Lap Timing
- Setting Up Programmable Timers
- Configuring World Time Settings
- Setting the Alarm
- Phone Finder
- Configuring Watch Settings
- Connection
- High/Low Tides, Moon Age, and Sunrise/Sunset Times
- Using the Training Function
- Viewing Training Log Records
- Receiving Phone Notifications
- Timer
- Stopwatch
- World Time
- Alarms
- Pedometer
- Other Settings
- Other Information
- Troubleshooting
11. Use (A) and (C) to select whether or not
you want to save your current settings.
[YES] Saves current settings.
[NO] Discards current settings.
[RETURN]
Returns to the number of
repeats setting.
12. Press (B) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the Timer Mode
screen will re-appear.
13. Repeat steps 2 through 12 as many times
as necessary to configure the settings of
the other timers.
Note
●
To exit the program setting operation
at any point, press (D) and advance to
step 11.
Using a Programmable Timer
1. Enter the Timer Mode.
l
Navigating Between Modes
2. Press (B) to start the timer countdown.
●
To pause an ongoing timer countdown,
press (B). You can reset a paused
countdown to its start time, by pressing
(D).
●
When there is a multiple timer
countdown operation in progress, you
can immediately terminate the current
countdown and start the next
countdown by holding down (A) for at
least two seconds.
Stopwatch
The stopwatch can be used to perform 1-
second unit elapsed time measurement up to
99 hours, 59 minutes, 59 seconds.
It can also measure split times.
Measuring Elapsed Time
1. Enter the Stopwatch Mode.
l
Navigating Between Modes
2. Use the operations below to measure
elapsed time.
B
B
B
B
Stop
Resume
Stop
Start
Hour, minute, second
3. Press (D) to reset the stopwatch to all
zeros.
Measuring a Split Time
1. Enter the Stopwatch Mode.
l
Navigating Between Modes
2. Use the operations below to measure
elapsed time.
B
D
D
B
Stop
Split release
Split
Start
Hour, minute, second
3. Press (D) to reset the stopwatch to all
zeros.
World Time
World Time lets you look up the current time
in any one of 38 cities around the globe, and
UTC (Universal Coordinated Time).
Note
●
World Time cities that can be selected
only by using G-SHOCK MOVE cannot
be selected using watch operations.
l
Configuring World Time Settings
Operation Guide 3482
25