User Manual

EN-38
Assembling the Stand
4. Insert angle brackets H into the gap between
the anti-tipping bracket and the side panel.
5. From the outside of side panels A and B,
temporarily tighten the screws you loosened
in step 3, above.
6. Mount pedal unit E onto angle brackets H ,
which you installed in step 5, above.
7. Use two F screws to secure both ends of the
pedal unit
E to the angle brackets.
8. Cover the heads of the F screws with screw
caps
I .
9. After adjusting the position (height) of pedal
unit
E , fully tighten the screws that you
temporarily tightened in step 5, above.
H
E
F
I
PX760-ES-1A.indd 40 2014/06/24 10:35:16