User Manual

English
General Guide
EN-5
Your Digital Piano lets you save its current settings and
lock its buttons to protect against operation errors. For
details, see “Parameter List” on pages EN-28 - EN-31.
Perform the following procedure when you want to
return the Digital Piano’s stored data and settings to
their initial factory defaults.
1. Turn off the Digital Piano.
2. While holding down both the ELEC. PIANO 1
and FUNCTION buttons, press the P
(Power) button.
3. Keep the ELEC. PIANO 1 button and
FUNCTION button depressed as the Digital
Piano performs the operation described
below.
(1) The GRAND PIANO (CONCERT), GRAND
PIANO (MODERN), and ELEC. PIANO 1 button
indicator lamps start to flash in sequence.
(2) The flashing sequence gradually increases in speed.
(3) After some time, the flashing will stop.
4. Release the ELEC. PIANO 1 button and
FUNCTION button.
• The Digital Piano will initialize its internal system.
You will be able to use the Digital Piano in a short
while.
NOTE
• See “Turning Power On or Off” (page EN-6) for
information about turning power on and off.
Saving Settings and Using
Operation Lock
Returning the Digital Piano to
Its Factory Default Settings
PX760-ES-1A.indd 7 2014/06/24 10:35:11