User manual

Connecting a Different Watch to a
Phone
You should perform the steps below before
pairing
a different watch with the phone, such
as after you buy a new watch.
●
Pairing the Watch with a Phone
1.
Y On the Home Screen, tap the “CASIO
WATCH+
” icon.
2.
Y In
the upper left corner of the screen, tap
x.
3.
Y On
the list that appears, tap the brand of
the phone you want to connect with.
4.
Y Perform operations as instructed by the
app.
●
The model name is stamped on the
back cover of the watch.
●
Connecting
with a Watch that is Already
Paired
1.
Y On the Home Screen, tap the “CASIO
WATCH+
” icon.
2.
Y Swipe the screen to scroll through
available
watches and display the one you
want to connect with.
3.
X Perform watch operations in
accordance with the instructions that
appear on the phone screen.
Important!
●
A
phone can be connected with only
one watch at a time. To connect to
another watch, you need to
terminate the current connection.
Watch Settings
Use the procedure below to configure your
Home City (current location) time and your
Dual Time settings manually.
Setting the Time and Date
While the watch is connected to a phone, it will
automatically adjust its day and time settings
to those of the phone. If the watch is not
connected to a phone, use the procedure
below to adjust its day and time settings.
1.
Pull out the crown to the second click.
This causes the second hand to move to
12
o’clock, and enables the minute setting
operation.
30
Crown
Minutes
2.
Rotate the crown to change the minute
setting.
●
The Dual Time setting is also adjusted
in accordance with the current time
setting.
3.
Press (A).
This enables the time and day setting
operation.
4.
Rotate the crown to change the time and
day settings.
●
Check the a.m./p.m. setting whenever
there is a change to another day.
30
Crown
Day indicator
Hours
5.
Press (A).
This enables the month setting operation.
6.
Rotate the crown to change the month
setting.
8
93
4
2
5
7
1
6
12
10
11
Month
7.
Press (A).
This enables the year 10’s digit setting
operation.
8.
Rotate the crown to change the year 10’s
digit.
80
90 30
40
20
50
70
10
60
00
Year (10’s digit)
9.
Press (A).
This enables the year one’s digit setting
operation.
10.
Rotate
the crown to change the year one’s
digit.
8
93
4
2
5
7
1
6
0
Year (one’s digit)
11.
On a time signal at the top of a minute,
push the crown back in.
Operation Guide 5459/5460
9