User manual

Important!
●
Depending on light intensity and
local conditions, the watch may
become hot to the touch when
exposed to light for charging. Take
care to avoid burn injury after
charging. Also, avoid charging the
watch under high-temperature
conditions like the ones described
below.
ー
On the dashboard of a vehicle
parked in the sun
ー
Near an
incandescent light bulb or
other source of heat
ー
Under direct sunlight or in other
hot areas for long periods
●
Remaining Charge and Dead Battery
The charge level is indicated by watch hand
movement. Functions become disabled as
battery power goes low.
Important!
●
Should battery go low or go dead,
expose the
face (solar panel) to light
as soon as possible.
Note
●
Exposing the
watch face to light after
the battery goes dead will cause the
second hand to revolve
counterclockwise until it stops at
second 57. This indicates charging
has started.
Low Battery Power
The second hand jumps at two-second
intervals.
30
Second hand
Dead Battery
All hands and the day indicator are stopped.
1
●
Charging Time Guidelines
The table below shows guidelines for
approximate charging times.
Required Charging Time for 1-day Use
Light Intensity Approximate Charging Time
High
p
Low
A
8 minutes
B
30 minutes
C
48 minutes
D
8 hours
Time Required to Achieve Next Charge
Level
Light Intensity
Charge Level
1
Charge Level
2
High
p
Low
A
2 hours 21 hours
B
5 hours 75 hours
C
8 hours 121 hours
D
82 hours -
Light Intensity
A
Sunny day, outdoors (50,000 lux)
B
Sunny day, near a window (10,000 lux)
C
Overcast day, near a window (5,000 lux)
D
Indoor fluorescent lighting (500 lux)
Charge Level 1:
Time from dead battery until hand movement
starts
Charge Level 2:
Time from hand movement starts until a full
charge
●
Power Saving
Leaving the watch in a dark location for
approximately one
week will cause movement
all of the watch’s hands to stop in order to save
power.
●
Only the day indicator is operational.
Recovering from Power Saving Operation
Press any button or place the watch in a well-
lit area to recover from power saving.
Using Mobile Link with
a Mobile Phone
While there is a Bluetooth connection
between the
watch and phone, the watch time
setting is adjusted automatically in
accordance with the phone’s time setting.
Note
●
This function is available only while
CASIO WATCH+ is running on the
phone.
●
This section describes watch and
phone operations.
X : Watch operation
Y : Phone operation
Getting Ready
A Installing required app on your
phone
To use the watch with a phone, first tap one of
the links
below and install the “CASIO WATCH
+” app on the phone.
●
iOS (iPhone) Users
https://itunes.apple.com/us/app/
id760165998?ls=1&mt=8
●
Android
TM
(GALAXY, etc.) Users
https://play.google.com/store/apps/details?
id=com.casio.watchplus
B
Configuring Bluetooth settings
Enable the phone’s Bluetooth.
●
iPhone Users
1.
Y On the Home Screen, tap “Settings” n
“Bluetooth
”.
2.
Y
Enable “Bluetooth”.
3.
Y Tap “Settings”
to return to the “Settings”
screen.
4.
Y Tap in
the following sequence: “Privacy”
n “Bluetooth Sharing”.
5.
Y Enable “CASIO WATCH+”.
●
Android Users
Y
Enable Bluetooth.
●
If you are presented with a choice between
“Bluetooth
” and
“Bluetooth Smart”, select
“Bluetooth Smart”.
Operation Guide 5466
4