User manual
Table Of Contents
- Before Getting Started...
- Time Adjustment
- Using Mobile Link with a Mobile Phone
- Getting Ready
- Auto Time Adjustment
- Mode Customization
- Customizing the Timekeeping Mode Screen
- Viewing Step Count Data
- Recording Your Current Location (Location Memory)
- Checking the Distance and Bearing to a Location Memory Point (Location Indicator)
- Auto Altitude Calibration
- Recording Waypoints and Their Altitudes (Mission Log)
- Configuring World Time Settings
- Adjusting Hand Alignment
- Phone Finder
- Configuring Watch Settings
- Changing the Home City Summer Time Setting
- Connection
- Digital Compass
- Altitude Measurement
- Barometric Pressure Measurement
- Checking the Current Barometric Pressure
- Checking Changes in Barometric Pressure Over Time
- Checking the Change in Barometric Pressure between Two Readings
- Barometric Pressure Change Indications
- Calibrating Barometric Pressure Readings (Offset)
- Specifying the Barometric Pressure Unit
- Barometric Pressure Reading Precautions
- Temperature Measurement
- Viewing Altitude Records
- Sunrise and Sunset Times
- Stopwatch
- Timer
- Alarms and Hourly Time Signal
- World Time
- Pedometer
- Hand Alignment Adjustment
- Other Settings
- International Travel
- Other Information
- Troubleshooting
●
Altitude Record Recall Mode
Use this mode to view altitude records.
l
Viewing Altitude Records
①
Data search
Data search
A
Number of the record displayed last time
the Altitude Record Recall Mode was
used
●
Sunrise/Sunset Mode
Use this mode to check the sunrise and sunset
times for your Home City.
l
Sunrise and Sunset Times
⑤
③②
①
④
Date search
Date search
A
Year, month, day
B
Sunrise time
C
Sunrise indicator
D
Sunset time
E
Sunset indicator
●
Stopwatch Mode
Use this mode to measure elapsed time.
l
Stopwatch
②①
③
Start/Stop
Split/reset
A
Stopwatch minutes
B
Stopwatch seconds
C
Stopwatch: 1/100 second
●
Timer Mode
Use this mode to countdown from a desired
start time.
l
Timer
②①
③
Start/Stop
Reset
A
Timer hours
B
Timer minutes
C
Timer seconds
●
Alarm Mode
The watch will beep when an alarm time is
reached.
l
Alarms and Hourly Time Signal
When the last screen was an alarm screen
②
②
③
①
Select alarm/
hourly time signal
Select alarm/
hourly time signal
On/off
When the last screen was the hourly time
signal screen
④
Select alarm/
hourly time signal
Select alarm/
hourly time signal
On/off
A
Alarm number
B
Alarm enabled/disabled
C
Alarm hour/minute
D
Hourly time signal enable/disable
●
World Time Mode
This mode shows the current time in 38 cities
and UTC (Coordinated Universal Time) time.
l
World Time
①
③
②
Select cityShow current city
Select city
A
Home City time
B
World Time City
C
World Time City current time
Shifting the Hands
Hand shift moves the hands out of the way for
easy viewing of display information.
1.
While holding down (L), press (E).
This will shift the analog hands to allow
easy viewing of display information.
2.
To return the hands to their normal
timekeeping positions, hold down (L) as
you press (E) again, or press (E) to change
to another mode.
Note
●
The hands will resume normal
timekeeping automatically if you
change modes or if you leave the
watch with its hands shifted and do not
perform any operation for about one
hour.
Operation Guide 5594
5