MA2009-EA © 2020 CASIO COMPUTER CO., LTD. Watch Operation Guide 5636 Contents Using Mobile Link with a Mobile Phone Alarm Configuring Alarm Settings Before Getting Started...
Watch Operation Guide 5636 Before Getting Started... This section provides an overview of the watch and introduces convenient ways it can be used. Note The illustrations included in this operation guide have been created to facilitate explanation. An illustration may differ somewhat from the item it represents.
Watch Operation Guide 5636 Mode Overview ● Calendar Mode The main hour, minute, and second hands indicate the current time. ● Stopwatch Mode ● Alarm Mode The second hand, and the small hour and minute hands indicate the elapsed stopwatch time. The small hour and minute hands indicate the alarm time. The second hand indicates the alarm enabled/ disabled setting. ● The small hour and minute hands show another time (Dual Time). ① The main hour and minute hands indicate the current time.
Watch Operation Guide 5636 ● Fast Forward/Fast Reverse Crown Shifting the Hands Hand shift moves the hands out of the way for easy viewing of display info. Important! ● 1. Press (A). Normal timekeeping ● Second click First click ● Stopping Fast Forward/Fast Reverse Rotate the crown in the direction opposite that of the ongoing operation or press any button.
Watch Operation Guide 5636 Dead Battery ● Power Saving All hands and the day indicator are stopped. If the watch is not moved for about one hour, the connection with your phone will be terminated and the watch will enter Level 1 power saving. Also, leaving the watch in a dark location for about one hour between the hours of 9 p.m. and 6 a.m. will cause the second hand to stop, and the watch will enter Level 2 power saving.
Watch Operation Guide 5636 Selection of More Than 300 World Time cities l Configuring World Time Settings Referring to the information below, configure the time setting in accordance with the method that suits your own lifestyle. Time Adjustment Using a Time Signal Overview Do you use a phone? Time adjustment by connecting with your phone is recommended. l Auto Time Adjustment The watch’s time and day settings can be configured in accordance with a received time calibration signal.
Watch Operation Guide 5636 Appropriate Signal Reception Location A time calibration signal can be received while the watch is near a window. ● ● Position the watch so its 12 o’clock side is facing the window. Time Calibration Signal Reception Ranges Time calibration signal reception is supported in the areas shown below. ● Japan Time Calibration Signal (JJY) Keep metal objects away from the watch. ● Do not move the watch. ● Do not perform any operation on the watch.
Watch Operation Guide 5636 Manual Time Signal Receive Important! ● Signal Reception Precautions ● A manual time calibration signal receive operation cannot be performed while the watch is paired with a phone. When you want to perform a manual time calibration signal receive operation, unpair the watch from your phone. l Unpairing ● ● 1. Place the watch near a window or some other location appropriate for time signal reception. 2. Enter the Calendar Mode. l Navigating Between Modes 3.
Watch Operation Guide 5636 ● Adjusting the Time and Day Setting 1. Loosen the crown and then pull it out to the second click. 9. Rotate the crown to move the second hand to the desired setting for the year one’s digit. The second hand will point to the currently selected time zone. ● The mode hand will point to the summer time setting for the currently selected Home City. 1 2 9 Time zone 3 8 4 7 6 30 11. Rotate the crown to change the month. Summer time setting 2.
Watch Operation Guide 5636 Checking the Last Time Adjustment Result 1. Enter the Calendar Mode. l Navigating Between Modes Using the Watch in a Medical Facility or Aircraft When you are in a hospital, on an aircraft, or in any other location where auto time signal reception or connection with a phone may cause problems, enable the watch’s Airplane Mode. To disable the watch’s Airplane Mode, perform the same operation again.
Watch Operation Guide 5636 3. Y Perform the operation shown on the screen of the phone to be paired with. ● ● If a pairing prompt message appears, perform the operation shown on the phone screen. ● If pairing fails for some reason, the watch will return to the state in step 1 of this procedure. Perform the pairing procedure again from the beginning. The watch may not be able to perform auto time adjustment under the conditions described below.
Watch Operation Guide 5636 Configuring World Time Settings Specifying a World Time City with G-SHOCK Connected causes the watch’s World Time City to change accordingly. The standard time/summer time setting of the World Time will be adjusted automatically without any watch operation required by you. ● ● ● Configuring the Summer Time Setting 1. Y Tap the “G-SHOCK Connected” icon. 2. Y Perform the operation shown on the phone screen to select a summer time setting.
Watch Operation Guide 5636 Configuring Timer Settings ● ● Enter the Calendar Mode and then press (D). Next, check to make sure that the second hand is pointing to [Y(YES)]. If the second hand is not pointing to [Y(YES)], refer to the information at the link below. l Connecting with a Phone Phone Finder You can use phone finder to trigger a tone on the phone to make it easy to find. The tone is forced to sound even if the phone is in vibrate mode. Important! ● 1. Y Tap the “G-SHOCK Connected” icon. 2.
Watch Operation Guide 5636 Connection ● Deleting Pairing Information from G- Connecting with a Phone 1. Y Tap the “G-SHOCK Connected” icon. Your watch can connect with a phone that is paired with it. ● If the watch is not paired with the phone you want to connect with, refer to the information below and pair them. l C Pair the watch with a phone. ● Connecting with a Phone 2. Y Perform the operation shown on the ● Deleting Pairing Information from the Watch 1.
Watch Operation Guide 5636 3. Rotate the crown to change the time zone. The Dual Time hour and minute hands indicate the current time in the selected time zone. Stopwatch 1. Enter the Calendar Mode. l Navigating Between Modes 2. Loosen the crown and then pull it out to the first click. The second hand will point to the currently selected time zone. ● The stopwatch measures elapsed time in units of one second up to 23 hours, 59 minutes, 59 seconds (24 hours).
Watch Operation Guide 5636 Using the Timer Timer The timer counts down from a start time specified by you. A beeper sounds when the end of the countdown is reached. ● Configuring Alarm Settings 1. Enter the Timer Mode. 1. Enter the Alarm Mode. 2. Press (D) to start the countdown. 2. Loosen the crown and then pull it out to the l Navigating Between Modes The beeper is muted when battery power is low. l Navigating Between Modes first click. Seconds This turns on the alarm. 3.
Watch Operation Guide 5636 Adjusting Hand and Day Indicator Alignment Confirm that the mode hand is stopped at 12 o’clock, and check if the day is indicated properly. 1. Loosen the crown and then pull it out to the 0 33 0 The watch performs alignment of the hour hand, minute hand, and second hand automatically. Adjusting Hand and Day Indicator Alignment Day (Operation start day) 6.
Watch Operation Guide 5636 International Travel When you enter another time zone, the watch will adjust its time setting to your current location in accordance with the time zone of your phone. When you reach your destination, disable the watch Airplane Mode. Other Information This section provides non-operational information you also need to know. Refer to this information as required. 30 1. When you reach your destination, establish a connection between the watch and your phone.
Watch Operation Guide 5636 Mobile Link : Auto Time Correction Phone finder Watch operation sounds the alert sound of the phone. World Time Current time for a selection of approximately 300 cities Home Time/World Time swapping Auto summer time setting Automatic switching between standard time and summer time.
Watch Operation Guide 5636 Troubleshooting Signal Reception (Time Calibration Signal) Q1 The watch cannot perform a receive operation. Is the watch’s battery charged? Signal reception is not possible while battery power is low. Keep the watch exposed to light until it recharges sufficiently. l Solar Charging Is the watch in the Calendar Mode? The watch cannot receive time calibration signals while the Airplane Mode is enabled or while the watch is in a mode other than the Calendar Mode.
Watch Operation Guide 5636 I can’t pair the watch with a phone. I can’t reconnect the watch and phone. Q1 I’ve never been able to establish a Q1 The watch will not re-connect with the (pairing) connection between the watch and phone. Are you using a supported phone model? https://world.casio.com/os_mobile/wat/ Is G-SHOCK Connected running? The watch cannot re-connect with your phone unless G-SHOCK Connected is running on the phone. On the phone’s Home Screen, tap the “G-SHOCK Connected” icon.
Watch Operation Guide 5636 Auto Time Adjustment by Bluetooth Connection (Time Adjustment) Phone-Watch Connection Q1 I can’t establish a connection between the phone and watch. Have you tried turning your phone off and then back on again? Turn the phone off and then back on, and then tap the “G-SHOCK Connected” icon. Next, on the watch, hold down (D) for at least 0.5 seconds until the second hand points to [C].
Watch Operation Guide 5636 Q2 The second hand is jumping at twosecond intervals. Battery power is low. Keep the watch exposed to light until it recharges sufficiently. l Solar Charging Q3 All hands are stopped and buttons do not work. The battery is dead. Keep the watch exposed to light until it recharges sufficiently. l Solar Charging Q4 The hands suddenly start moving at Crown Operations Q1 Nothing happens when I rotate the crown.
