MA2208-EA © 2022 CASIO COMPUTER CO., LTD.
Watch Operation Guide 5690 Precautions ● ● Operating Precautions ● Water Resistance ● The information below applies to watches with WATER RESIST or WATER RESISTANT marked on the back cover.
Watch Operation Guide 5690 ● Temperature ● ● Never leave your watch on the dashboard of a car, near a heater, or in any other location that is subject to very high temperatures. Do not leave your watch where it will be exposed to very low temperatures. Temperature extremes can cause your watch to lose or gain time, to stop, or otherwise malfunction. Leaving your watch in an area hotter than +60 °C (140 °F) for long periods can lead to problems with its LCD.
Watch Operation Guide 5690 ● Bacteria and Odor Resistant Band ● The bacteria and odor resistant band protects against odor generated by the formation of bacteria from sweat, which ensures comfort and hygiene. In order to ensure maximum bacteria and odor resistance, keep the band clean. Use an absorbent soft cloth to thoroughly wipe the band clean of dirt, sweat, and moisture. A bacteria and odor resistant band suppresses the formation of organisms and bacteria.
Watch Operation Guide 5690 Battery Replacement ● ● ● ● Leave battery replacement up to your original retailer or authorized CASIO service center. Mobile Link Precautions ● Legal Precautions ● Have the batteries replaced only with the type specified in the “Specifications”. Use of a different battery type can cause malfunction. When replacing the batteries, also request a check for proper water resistance.
Watch Operation Guide 5690 Before Getting Started... General Guide ① Watch Face and Display Indicators ② ① This section provides an overview of the watch and introduces convenient ways it can be used. ⑦ ⑧ Watch Features ● Phone Linking The watch supports connection and communication with a Bluetooth capable phone. ● World Time Display the current time in any one of 38 time zones* around the globe. * Subject to being updated when connected with a phone.
Watch Operation Guide 5690 Navigating Between Modes Cycling Between Timekeeping Mode Digital Display Contents Each press of (C) cycles between watch modes. ● In any mode, hold down (C) for at least one second to return to the Timekeeping Mode. Timekeeping Mode Each press of (A) in the Timekeeping Mode toggles between the display information as shown below. Shifting Hands to Read the Digital Display Hand shift moves the hands out of the way for easy viewing of display information. 1.
Watch Operation Guide 5690 ● Specifying the Illumination Duration You can select either 1.5 seconds or three seconds as the illumination duration. 1. Enter the Timekeeping Mode. l Navigating Between Modes 2. Hold down (A) for at least two seconds Useful Features Pairing the watch with your phone makes a number of the watch’s features easier to use. Auto time adjustment l Auto Time Adjustment until the name of the currently selected Home City is displayed.
Watch Operation Guide 5690 4. Y Perform the operation shown on the screen of the phone to be paired with. When a connection is established between the watch and phone, [CNCT] will stop flashing. ● If pairing fails for some reason, [ERR] will appear on the display momentarily and then the watch will return to the Timekeeping Mode. Perform the pairing procedure again from the beginning. Pairing started. Pairing complete.
Watch Operation Guide 5690 Receiving CASIO WATCHES Information On the Watch You can configure settings so the watch receives CASIO WATCHES update and other information whenever it connects with a phone to adjust its current time setting. 1. Y Tap the “CASIO WATCHES” icon. Configuring World Time Settings Specifying a World Time City with CASIO WATCHES causes the watch’s World Time City to change accordingly. Settings can be configured to perform auto summer time switching for the World Time City.
Watch Operation Guide 5690 ● Swapping Your World Time and Home Time 1. Y Tap the “CASIO WATCHES” icon. 2. X Hold down (C) for at least three seconds until [CNCT] starts to flash. Release the button when the mode hand moves to e. When a connection is established between the watch and phone, [CNCT] will stop flashing. ● Adjusting Hand Alignment If the hands are out of alignment even though auto time adjustment is being performed, use CASIO WATCHES to adjust them. 1. Y Tap the “CASIO WATCHES” icon. 2.
Watch Operation Guide 5690 Changing the Home City Summer Time Setting 1. Y Tap the “CASIO WATCHES” icon. 2. X Hold down (C) for at least three seconds until [CNCT] starts to flash. Release the button when the mode hand moves to e. When a connection is established between the watch and phone, [CNCT] will stop flashing. ● If connection fails for some reason, [ERR] will appear on the display momentarily and then the watch will return to the Timekeeping Mode.
Watch Operation Guide 5690 Note ● This causes the seconds to flash. The connection will be terminated if you do not perform any operation on the watch or phone for a fixed amount of time. To specify the connection limit time, perform the following operation with CASIO WATCHES: “Watch settings” n “Connection time with the app”. Next, select a setting of 3 minutes, 5 minutes, or 10 minutes. Your watch can connect with a phone to obtain information that it uses to adjust its date and time setting.
Watch Operation Guide 5690 Using Watch Operations to Adjust the Time Setting If your watch cannot connect with a phone for some reason, you can use watch operations to adjust date and time settings. ● Setting a Home City 5. Use (D) to select a summer time setting. Each press of (D) cycles through available settings in the sequence shown below. ● ● Use the procedure in this section to select a city to use as your Home City.
Watch Operation Guide 5690 4. Configure the date and time settings. ● ● To reset the seconds to 00: Press (D). 1 is added to the minutes when the current count is between 30 and 59 seconds. For all the other settings, use (B) and (D) to change the flashing setting. Holding down (B) or (D) scrolls through settings at high speed. ● Switching between 12-hour and 24- hour Timekeeping You can specify either 12-hour format or 24hour format for the time display. 1. Enter the Timekeeping Mode.
Watch Operation Guide 5690 World Time World Time lets you look up the current time in any one of 38 cities around the globe, and UTC (Coordinated Universal Time). Setting the World Time City Use the procedure in this section to select a World Time city. If you are in an area that observes summer time, you can also configure a summer time setting. Note ● The initial factory default summer time setting for all cities is [AUTO].
Watch Operation Guide 5690 Alarm The watch will beep when an alarm time is reached. You can set up to five different alarms. The hourly time signal causes the watch to beep every hour on the hour. ● 3. Hold down (A) for at least two seconds. Release the button when the hours digits start to flash. ● An alarm will not sound if the battery is low. ● This is the setting mode. The hands automatically shift out of the way for easy viewing of the display and other indicators.
Watch Operation Guide 5690 Turning Off an Alarm or the Hourly Time Signal 3. Press (A) to turn off the displayed alarm or the hourly time signal. ● To stop an alarm or the hourly time signal from sounding, perform the steps below to turn it off. ● ● To have an alarm or hourly time signal sound again, turn it back on. Each press of (A) toggles between on and off. Turning off all of the alarms and the hourly time signal causes [ALM] and [SIG] to disappear from the display.
Watch Operation Guide 5690 ● After Arriving Stopwatch 1. Swap the origin time zone time with the destination time zone time. Before swapping After swapping The stopwatch measures elapsed time in 1/100-second units for the first hour, and in 1second units after that for up to 24 hours. Measuring a Split Time 1. Enter the Stopwatch Mode.
Watch Operation Guide 5690 Timing the First and Second Place Finishers 1. Enter the Stopwatch Mode. l Navigating Between Modes 2. Use the operations below to measure Timer The timer counts down from a start time specified by you. A beeper sounds when the end of the countdown is reached. ● elapsed time. The beeper will not sound if the battery is low. 3. Use (B) and (D) to change the timer hours setting. ● Holding down (B) or (D) scrolls through settings at high speed. 4. Press (C).
Watch Operation Guide 5690 Using the Timer 1. Enter the Timer Mode. l Navigating Between Modes Hour, minute Seconds 2. Use the operations below to perform a timer operation. D Start Hand Alignment Adjustment 4. Press (C). This enables adjustment of the hour and minute hands. Strong magnetism or impact can cause the time indicated by the analog hands to become different from the time on the digital display. If this happens, adjust hand alignment.
Watch Operation Guide 5690 Other Settings This section explains other watch settings you can configure. Changing the Date Display Format Specifying the Day of the Week Language You can select any one of six languages for the day of the week display in the Timekeeping Mode. 1. Enter the Timekeeping Mode. l Navigating Between Modes 2. Hold down (A) for at least two seconds Use the procedure below to enable or disable the tone that sounds when you press a button. 1. Enter the Timekeeping Mode.
Watch Operation Guide 5690 Resetting Watch Settings This section explains how to return the watch settings below to their initial factory defaults. ● Watch Settings ● Stopwatch ● Timer ● Alarm Other Information This section provides non-operational information you also need to know. Refer to this information as required. City Table 1. Enter the Timekeeping Mode. City l Navigating Between Modes 2.
Watch Operation Guide 5690 City Name Summer Time Start Summer Time End London 02:00, last 01:00, last Sunday in Sunday in March October Paris 03:00, last 02:00, last Sunday in Sunday in March October Athens 04:00, last 03:00, last Sunday in Sunday in March October Tehran 00:00, 00:00, March 22 September 22 or or 21 21 Sydney, Adelaide 02:00, first Sunday in October 03:00, first Sunday in April 02:00, first Lord Howe Sunday in Island October 02:00, first Sunday in April 02:00, last Wellington
Watch Operation Guide 5690 Copyrights and Registered Copyrights ● ● ● ● ● ● The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by CASIO Computer Co., Ltd. is under license. iPhone and App Store are trademarks of Apple Inc. in the United States and other countries. iOS is a trademark or registered trademark of Cisco Systems, Inc. GALAXY is a registered trademark of Samsung Electronics Co., Ltd.
Watch Operation Guide 5690 Q2 I can’t connect while my phone is in the Airplane Mode. Connection with the watch is not possible while the phone’s Airplane Mode is enabled. After disabling the phone’s Airplane Mode, go to the phone’s Home Screen and tap the “CASIO WATCHES” icon. Next, on the watch, hold down (C) for at least three seconds. Auto Time Adjustment by Bluetooth Connection (Time Adjustment) Phone-Watch Connection Q1 I can’t establish a connection between the phone and watch.
Watch Operation Guide 5690 Alarm and Hourly Time Signal Q1 An alarm does not sound. The alarm’s settings may not be configured. Configure the alarm settings. l Configuring Alarm Settings Q2 The hands suddenly start moving at high speed. This is due to the reason (or one of the reasons) below, and does not indicate malfunction. Simply wait until normal hand movement resumes. ● Q2 The hourly time signal does not sound.
