User Manual

20010101
Sample
Selecting this parameter displays a screen for making real-time settings, and for specifying
the sampling interval, number of samples, measurement time recording method, and storage
location for measurement time records.
• To change Sample Setup settings
1. While the Advanced Setup menu is on the display, press c(Sample).
• This displays the Sample Setup screen.
2. Use the function key operations described below to change Sample Setup settings.
•To change the setting of an item, first use the f and c cursor keys to move the
highlighting to the item. Next, use the function keys to select the setting you want.
(1) Real-time Settings (Real-Time)
• 1(NO) .......... Disables real-time sampling.
• 2(YES) ........ Enables real-time sampling.
(2) Sampling Interval (Interval)
• 1(TIMER) .... Displays a dialog box for specifying a timer value, and enables fixed-
interval sampling.
• 2(KEY) ........ Starts sampling operation that uses the EA-100 [TRIGGER] key. The
[TRIGGER] key must be pressed the number of times specified for
the number of samples.
• 3(GATE) ...... Starts sampling in accordance with the Photogate Gate Status trigger
timing. Press 1, 2, or 3 to specify the channel of the Photogate
sensor. Photogate is assigned to the sensor of the specified channel.
(3) Number of Samples (Number)
• 1(NUM) ....... Displays a dialog box for specifying the number of samples by
inputting a value from 1 to 255.
4-2-7
EA-100 Setup
20011101