User Manual

Message Format: 9nH kkH vvH

n: MIDI Channel Number

kk: Key Number

vv: Velocity

Transmit

Sent when something is played on the keyboard. The key number changes in accordance

with on the Transpose function and Octave Shift function.

Receive Receipt sounds a note of the corresponding instrument part.

When a High Resolution Velocity Preﬁx message is received immediately prior to the Note On message

and the lower seven bits of the 14-bit Velocity are set, the 14-bit resolution note on is performed.

For information about the relationship between the Note On message and High Resolution Velocity

Preﬁx message, see ”Instrument Velocity Resolution” at the beginning of part II.

7 Control Change

Message Format: BnH ccH vvH

n: MIDI Channel Number

cc: Control Number

vv: Value

For details about messages, see each section of this manual that covers them.

7.1 Bank Select (00H,20H)

Message Format: BnH 00H mmH (MSB)

BnH 20H llH (LSB)

n: MIDI Channel Number

mm: MSB Value(Note1)

ll: LSB Value(Transmit:00H, Receive:Ignored)

Note1: For details about the relationship between the MSB value and the tone, see the Tone List that comes with the

Instrument’s User’s Guide.

Transmit Sent when a tone setup number is selected.

Receive Receipt causes a change in the tone bank number stored in Instrument memory, but the

tone is not actually changed until a Program Change message is received. For details, see “8 Program

Change”.

7.2 Modulation wheel or lever (01H)

Message Format: BnH 01H vvH

n: MIDI Channel Number

vv: Value