User Manual

EN-52
USB Flash Drive
The table below shows messages that appear on the Digital Piano display when data transfer fails or when another
type of error is generated.
• To clear an error display, press the ckEXIT button.
Error Indicators
Display Cause Action
No Media 1. The USB flash drive is not connected to the Digital
Piano’s USB flash drive port.
1. Correctly plug the USB flash drive into the USB
flash drive port.
2. The USB flash drive was removed while some
operation was in progress.
2. Do not remove the USB flash drive while any
operation is in progress.
3. The USB flash drive is write-protected. 3. Unprotect the USB flash drive.
4. The USB flash drive has anti-virus software. 4. Use a USB flash drive that does not have anti-virus
software.
5. The Digital Piano is unable to recognize the USB
flash drive for some reason.
5. Remove the USB flash drive, turn the Digital Piano
off and then back on again, and then correctly load
the USB flash drive.
No File There is no loadable file in the “MUSICDAT” folder
or no playable file in the “MUSICDAT” folder.
• Format the USB flash drive on the Digital Piano.
• Move the file you want to load into the
“MUSICDAT” folder or the file you want to play
into the “MUSICDAT” folder (page EN-48).
No Data You are attempting to save data to a USB flash drive
when there is no data to save.
Record something before performing a save
operation.
Read Only A read-only file with the same name you are trying to
use is already stored on USB flash drive.
• Change the name and then save the new data.
• Remove the read-only attribute from the existing
USB flash drive file and overwrite it with the new
data.
• Use a different USB flash drive.
Media Full There is not enough space available on the USB flash
drive.
Delete some of the files on the USB flash drive to
make room for new data or use a different USB flash
drive.
Too Many Files 1. There are too many files on the USB flash drive. 1. Delete some of the files on the USB flash drive to
make room for new data.
2. There is a file named TAKE99.WAV in the
“MUSICDAT” folder.
2. Delete the WAV file in the “MUSICDAT” folder.
Not SMF0/1 You are attempting to play back SMF Format 2 song
data.
This Digital Piano supports playback of SMF Format
0 or Format 1 only.
Size Over The data on the USB flash drive is too big to play. Reduces the size of the data so it can be played.
Wrong Data 1. The USB flash drive data is corrupted.
—
2. USB flash drive contains data that is not supported
by this Digital Piano.
Memory Full There is not enough Digital Piano memory available
to convert a MIDI recorder song to SMF data and
store it on the USB flash drive.
Reduce the size of the song data.
Example:
Delete any tracks that are not required.
Format Error 1. The USB flash drive format is not compatible with
this Digital Piano.
1. Format the USB flash drive on the Digital Piano.
2. The USB flash drive is corrupted. 2. Use a different USB flash drive.
Media Error The USB flash drive is corrupted. Use a different USB flash drive.
File Name Error 1. When renaming a file on a USB flash drive, you
specified a new file name that is already used for
another file on the USB flash drive.
1. Rename to a different file name.
2. You are attempting to play a Concert Play song
data obtained with a computer, etc. when there are
no files in the “CP” folder. Or the file names are
wrong.
2. Change name part (the part to the left of the file
name extension) of the Concert Play song files
(both the .LSN and .PLY files) to the same name.
Next, place the files into the “CP” folder.
AP700-ES-1B.indd 54 2015/04/06 12:23:04