User Manual

Troubleshooting
EN-65
English
A tone’s quality and volume
sounds slightly different
depending where it is
played on the keyboard.
This is an unavoidable result of the digital sampling process,
*
and does not indicate malfunction.
* Multiple digital samples are taken for the low range, middle range, and high range of the
original musical instrument. Because of this, there may be very slight differences in tonal
quality and volume between sample ranges.
When I press a button, the
note that is sounding cuts
out momentarily or there is
a slight change in how
effects are applied.
This happens when the sounds of multiple parts are sounding at the same time while using
layer, using the Duet Mode, playing back a built-in tune, recording, etc. Pressing a button when
one of these conditions exists will cause the effect setting that is built into the tone to change
automatically, which causes notes to cut out momentarily or causes a slight change in how
effects are being applied.
The play-along part (the
part played on the Digital
Piano) is slightly audible
during Play Mode playback.
Certain recording conditions may cause the play-along part to be slightly audible during Play
Mode playback. This does not indicate malfunction.
Problem Cause Action
See
Page
AP700-ES-1B.indd 67 2015/04/06 12:23:06