User Manual

Receive Receipt performs the same operation as when All Notes Oﬀ is received. Regardless of the

reception of this message, the instrument always operates as Poly mode.

5.29 Poly (7FH)

Message Format: BnH 7FH 00H

n: MIDI Channel Number

Receive Receipt performs the same operation as when All Notes Oﬀ is received. Regardless of the

reception of this message, the instrument always operates as Poly mode.

6 Program Change

Message Format: CnH ppH

n: MIDI Channel Number

pp: Program Number (Note1)

Note1: For details about the relationship between the program number and the tone, see the Tone List that comes with the

Instrument.

Transmit Sent when a tone number is selected.

Receive Receipt changes the tone of the corresponding part. The selected tone is determined by the

program value of this message and the Bank Select message value received prior to this message.

6.1 DSP Assignments during Tone Selection

6.1.1 DSP Line Structure

Though the Instrument has four DSP lines that can be used simultaneously, selecting a tone that uses

DSP causes the required number of DSP lines to become reserved so the tone is conﬁgured with the

requisite DSP. For information about tones that use DSP, see “17 Tone with DSP List”.

6.1.2 DSP Line Assignment

Selecting multiple tones with DSP at the same time creates the possibility that there will not be enough

DSP lines. In this case, the last selected tone with DSP is given priority. Some DSP line(s) already

being used will be released so they can be assigned to the newly selected tone.

7 Channel After Touch

Message Format: DnH vvH

n: MIDI Channel Number

vv: Value

Receive Receipt adds, to the tone being sounded, modulation of a depth speciﬁed by the value. In

the case of a tone that already has modulation applied, receipt of this message increases the modulation

depth. The modulation eﬀect diﬀers according to the tone being used.