ES USER’S GUIDE GUÍA DEL USUARIO AP31/33-ES-1 AP31/33_ES_cover.p65 Page 1 03.2.18, 9:56 Adobe PageMaker 6.
427B-E-002A AP31/33_ES_cover.p65 Page 2 03.2.18, 10:23 Adobe PageMaker 6.
IMPORTANT SAFETY INSTRUCTIONS “INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS” WARNING – When using electric products, basic precautions should always be followed, including the following: 11. Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with one wider than the other. The wide blade is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 1.
NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Introduction Congratulations on your selection of the CASIO Digital Piano. This piano is a sophisticated musical instrument that blends the very best of traditional piano feel and sound quality with the latest that modern electronics technology has to offer. Before using the instrument, be sure to carefully read through the instructions contained in this manual. Please keep all information for future reference.
Safety Precautions Symbols Symbol Examples Various symbols are used in this user’s guide and on the product itself to ensure that the product is used safely and correctly, and to prevent injury to the user and other persons as well as damage to property. Those symbols along with their meanings are shown below. WARNING This indication stipulates matters that have the risk of causing death or serious injury if the product is operated incorrectly while ignoring this indication.
WARNING Power Cord Improper use of the power cord can create the risk of fire and electric shock. Always be sure to observe the following precautions. • Use only the power cord specified for this piano. • Make sure that the power source you are using matches the rating marked on the instrument itself. • Do not use an extension cord to plug multiple devices into the same power outlet. Power Cord Improper use of the power cord can create the risk of personal injury, material damage, fire and electric shock.
In the event a foreign object should happen to get inside the instrument, please take the following actions: 1. Turn off power. 2. Unplug the power cord from the wall outlet. 3. Consult with the dealer where you purchased the instrument or with an authorized CASIO service provider. Do not expose this piano to rain or moisture. To reduce the risk of fire or electric shock, do not expose this piano to rain or moisture. Never try to take the piano apart or modify it.
CAUTION Power Cord Improper use of the power cord can create the risk of fire and electric shock. Always be sure to observe the following precautions. • Never locate the power cord near a stove or other source of heat. • When unplugging from an outlet, never pull on the cord. (Always grasp the plug when pulling.) • After use turn off the power switch of the instrument and unplug the power cord from the electrical outlet.
Do not place heave objects on the piano. Never place heavy objects on top of the piano. Doing so can cause the stand to tip over and the object to fall, creating the risk of personal injury. • Periodically check the screws that secure the piano to the stand for looseness. If a screw is loose, retighten it. Loose screws can cause the stand to tip over and the piano to fall, creating the risk of personal injury. Volume setting Do not play at very loud volumes for a long time.
Operational Precautions Locating the Unit Avoid the following locations. • Areas exposed to direct sunlight and high humidity. • Areas subjected to very low temperatures. • Near a radio, TV, video deck, or tuner (unit can cause interference with audio or video signals) Care of the Unit • Never use benzene, alcohol, thinner or other such chemicals to clean the exterior of the unit. • To clean the keyboard, use a soft cloth dampened with a weak solution of a mild neutral detergent and water.
Main Features ■ 8 versatile tones • Eight instrument tones including piano and pipe organ provide plenty of performance versatility. • Other features include digital effects that control the acoustical characteristic of tones, as well as three pedal effects for all the nuances of an acoustic piano. ■ Metronome • A simple operation lets you set the tempo and the beat of the metronome to suit the tune you want to play. It’s the perfect practice tool for players of all levels.
Contents IMPORTANT SAFETY INSTRUCTIONS Keyboard Settings................... E-19 Using Touch Select ..................................E-19 Using Transpose ......................................E-19 Introduction ............................... E-1 Adjusting the Tuning of the Piano ............ E-20 Safety Precautions .................... E-2 MIDI ........................................... E-21 What is MIDI? ..........................................E-21 Operational Precautions ...........
General Guide • Key, button, and other names are indicated in the text of this manual using bold type. • See page E-27 for details on the stand. Headphones IMPORTANT! Whenever connecting headphone, first set the VOLUME knob of the CELVIANO and the volume controller of the external equipment to relatively low volume settings. You can later adjust volume to the level you want after connections are complete.
Make sure that the cover of the piano is fully open whenever you are playing on the keyboard. A partially open cover can suddenly close unexpectedly and pinch your fingers. CAUTION * With the AP-31 and AP-33, the power cord is hard-wired to the bottom of the instrument.
Basic Operation 4. Using Tones The following procedures describe everything you need to know about selecting and using tones. Play something on the keyboard. • Adjust volume to the level you want as you play. 5. After you are finished playing, press the POWER button to turn off power. Selecting a Tone Your CELVIANO has a selection of 8 built-in tones. Using Digital Effects • The names of the tones are marked above the keyboard keys to which they are assigned.
To select a digital effect More about tones While holding down the CONTROL button, press the keyboard key that corresponds to the digital effect you want to select. Polyphony • A note does not sound when you press a keyboard key while holding down CONTROL. This piano can play up to 64 notes at the same time. Also note that some of the tones offer only 32-note polyphony (GRAND PIANO, MELLOW PIANO, ELEC PIANO 1, HARPSICHORD, STRINGS).
To assign the sostenuto to the left pedal (AP-31 only) Using the Pedals The AP-31 is equipped with the two pedals shown in the illustration below. The left pedal normally functions as a soft pedal. While holding down the left pedal, turn on CELVIANO power. To return left pedal to soft pedal, turn power off and then back on again. ❚ NOTE ❚ • The following shows how pedal effects are applied during different types of operations. Memory playback, demo tune play ...................
• You can also change the tempo setting(beats per minute) by holding down the CONTROL button and using keyboard keys B2 through A 3 to input values from 0 to 9. You can input a two-digit or three-digit tempo value. Note that the tempo value you input is applied when you release the CONTROL button. The tempo setting does not change if you input a one-digit value or a value that is outside of the allowable setting range. • The tempo can be set within the range of 30 to 255 (beats per minute).
Using the Memory This section describes how to record keyboard play to memory and playback data from memory. Recording To record notes from the keyboard About the Memory Memory Capacity Memory can hold up to 2,500 notes (one song). • Recording stops automatically and the indicator above the RECORD button goes out whenever memory becomes full. ❚ PREPARATION ❚ • Select the tone and effects you want to start with. • If you want to use the metronome during recording, start the metronome.
Playback Use the following procedure to play back from memory. To playback from memory 1. If you want the metronome to sound during playback of your recording, hold down the CONTROL button and press keyboard key B3 to turn on the metronome. Setting Range C4 B3: Metronome ON B 3 (black key): Metronome OFF • Using the metronome comes in handy, for example, when you want to record the left-hand part and then practice the right hand-part while playing back. 2.
Using Demo Tunes To stop demo tune play Your CELVIANO comes with eight built-in demo tunes, each of which features one of the eight built-in tones. Press the START/STOP button to stop demo tune play. To play the demo tunes in sequence ❚ NOTE ❚ • You cannot change the tempo or tone, or turn on the metronome while a demo tune is playing. • Playing on the keyboard during demo tune play plays notes using the demo tune’s tone. • You can adjust volume while demo playback is in progress.
Keyboard Settings Using Touch Select Using Transpose This setting lets you adjust the touch of the keyboard to suit your own playing style. This means you can select a stronger touch for those with powerful hands, and a lighter touch for beginners and anyone else with less strength. Use the keys shown below to change the Touch Select setting. Transpose lets you adjust the pitch of your CELVIANO in semitone steps.
Adjusting the Tuning of the Piano You can adjust the overall tuning of the piano for play along with another instrument. You can adjust tuning within a range of ±50 cents from A4 = 440.0Hz. Use the keyboard keys noted below to adjust the tuning of the piano. Setting Range C4 F4: + (raises the pitch) E4: – (lowers the pitch) To adjust the tuning of the piano Adjust the tuning as described below. While holding down the CONTROL button, press keyboard key E4 (–) to lower the tuning or F4 (+) to raise it.
MIDI What is MIDI? The letters MIDI stand for Musical Instrument Digital Interface, which is the name of a worldwide standard for digital signals and connectors that makes it possible to exchange musical data between musical instruments and computers (machines) produced by different manufacturers. MIDI compatible equipment can exchange keyboard key press, key release, tone change, and other data as messages.
Setting the Keyboard Channel Sending Memory Playback Data This parameter sets the channel for MIDI messages to an external device. You can set any MIDI channel in the range of 1 to 16 as the keyboard channel. You can send memory playback as MIDI data. The send channel used depends on the Keyboard Channel setting, as shown in the table below.
Program Change Number Settings The tones of your CELVIANO have two different sets of program numbers: Type 1 sequential numbers and Type 2 numbers that correspond to the General MIDI System (see “General MIDI” on page E-24). The tables below show the program numbers that are assigned, depending on whether you select Type 1 or Type 2 using the procedure under “To change the program change number type” on page E-24.
To change the program change number type While still holding down the CONTROL button, select the Program Change Mode by pressing one of the keyboard keys illustrated below. Turning Local Control On and Off This setting effectively determines whether or not the keyboard and pedals of the CELVIANO are connected to the CELVIANO’s sound source, as illustrated below. MIDI A 5 (black key): TYPE 1 C4 IN OUT A5: TYPE 2 • A note does not sound when you press a keyboard key while holding down CONTROL.
MIDI Data Notes This section provides details about the MIDI data your CELVIANO sends and receives. You can also find further technical information in the “MIDI Data Format” and “MIDI Implementation Chart”* at the end of this User’s Guide. * The MIDI Implementation Chart is a standard format summary of how data is transferred between your CELVIANO and a connected MIDI device. Keyboard Data (Note On, Note Off, Note Number, Velocity) The following four types of keyboard data can be sent and received.
Troubleshooting Possible Cause Symptom No sound produced when keyboard keys are pressed. 1. VOLUME knob set to MIN. 2. Headphones connected to the piano. 3. Local Control turned off. 1. Transpose is set to a value other than 0. Keyboard out of tune. 2. Incorrect tuning setting Action Reference 1. Move VOLUME knob more towards the MAX side. 2. Disconnect the headphones from the piano. 3. Turn on Local control. Page E-12 1.
Assembly Instructions • Illustrations in this User’s Guide shows the AP-31. 1 Assembling the stand ！ Caution • Take particular care to avoid injury when installing legs and pedals, and when mounting the keyboard onto the stand. • When assembling, make sure that the sliding keyboard cover of the piano body is completely closed. If the cover is left open during assembly, it may close suddenly causing the fingers to be pinched between the piano body and cover.
Figure 4 2 Installing the Keyboard onto the Stand A B C J ！ Caution (Back) 6 Take care that you do not pinch your fingers between the keyboard and stand! I J E L Figure 6 L F F 7 K 5. Attach back panel C to the E brackets and crosspiece D. Note that the back panel C should be installed so it is in front of the E brackets (Figure 4). Use the two L screws, six I screws to secure the back panel in place (Figures 3 and 4).
3 Connecting the Pedal ！ Caution The screws that you use to assemble the stand may become loose after a long period due to changes in temperature and humidity, or vibration caused by normal use, etc. Periodically check the screws used to fasten the stand and the butterfly bolts used to fasten the stand and the piano, and tighten them whenever necessary. Figure 8 Pedal plug Attachment of the Score Stand Install the music stand by inserting its pegs into the holes in the top of the piano.
Specifications All of the items in these specifications apply to the AP-31, AP-31V, AP-33, and AP-33V, unless specifically noted otherwise.
Appendix/Apéndice Initial Power On Settings The table below shows the initial settings of the CELVIANO whenever power is turned on. Item Setting Item Setting Tone GRAND PIANO Tuning A4 = 440.
MIDI Data Format Items marked “★” are receive only. Control Change Bank Select Channel Messages Format Note Messages Byte 1 BnH BnH Note Off Recognition Format Byte 1 8nH 9nH Byte 2 kkH kkH Byte 3 vvH 00H n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16) kk .... Note Number = 00H to 7FH vv .... Note Off Velocity = 00H to 7FH n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16) mm .. Bank Number MSB = 00H, 02H, 03H, 10H, 18H ll .......
Channel Volume ★ Sostenuto Format Format Byte 1 BnH Byte 2 07H Byte 3 vvH n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16) vv .... Volume = 00H to 7FH Pan ★ Format Byte 1 BnH Byte 2 0AH Byte 3 vvH n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16) vv .... Pan = 00H (left) to 40H (center) to 7FH (right) Byte 1 BnH Send n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16) vv .... Sostenuto = 00H, 7FH (00H:OFF, 7FH:ON) Soft Format Byte 1 BnH Format Byte 2 0BH Byte 3 vvH n .......
Brightness ★ Format Format Byte 1 BnH Byte 2 4AH Byte 3 vvH n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16) vv .... Filter Cutoff Frequency = 00H to 7FH Portamento Control ★ Format Byte 1 BnH Byte 2 54H Byte 3 kkH n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16) kk .... Source Note Number = 00H to 7FH Effect 1 Depth (Reverb Send Level) Format Byte 1 BnH Byte 2 5BH Byte 3 vvH n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16) vv ....
Filter Cut Off Frequency Filter/AMP Envelope Release Time NRPN MSB = 01H NRPN LSB = 20H Data Entry MSB = mmH NRPN MSB = 01H NRPN LSB = 66H Data Entry MSB = mmH mm .. Cut Off Frequency = 00H to 40H to 7FH (-64 to 0 to +63) mm .. Filter/AMP Envelope Release Time = 00H to 40H to 7FH (-64 to 0 to +63) Recognition When the instrument receives this message, the preset Filter Cut off Frequency value for the tone is changed to the value that corresponds to the data entry MSB of the received message.
Pitch Bend Sensitivity ★ Pitch Bend Change ★ RPN MSB = 00H RPN LSB = 00H Data Entry MSB = mmH Format mm .. Pitch Bend Sensitivity = 00H to 18H (0 to 24 semitones) Recognition The data entry LSB is always ignored. Byte 1 EnH Byte 2 llH Byte 3 mmH n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16) ll ....... Pitch Bend Change LSB = 00H to 7FH mm ..
All Note Off Poly Mode On ★ Format Format Byte 1 BnH Byte 2 7BH Byte 1 BnH Byte 3 00H Byte 2 7FH Byte 3 00H n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16) n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16) Recognition Receipt of the All Note Off message mutes all tones being played by data received over the MIDI channels (note off). If Hold 1 or Sostenuto is turned on when the All Note Off message is received, notes are sustained in accordance with the corresponding pedal operation.
7B-E-078B AP31/33_ES_MIDI Chart.p65 Page 2 03.2.18, 9:57 Adobe PageMaker 6.
427B-E-079B AP31/33_ES_MIDI Chart.p65 Page 3 03.2.18, 9:57 Adobe PageMaker 6.
This recycle mark indicates that the packaging conforms to the environmental protection legislation in Germany. Esta marca de reciclaje indica que el empaquetado conforma a la legislación de protección ambiental en Alemania. CASIO COMPUTER CO.,LTD. 6-2, Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan AP31/33_ES_cover.p65 Page 5 P 03.2.18, 9:56 MA0302-B Printed in China AP31/33-ES-1 Adobe PageMaker 6.
