MA2203-EB © 2021 CASIO COMPUTER CO., LTD.
Watch Operation Guide 5659 Precautions ● ● Operating Precautions ● Water Resistance ● The information below applies to watches with WATER RESIST or WATER RESISTANT marked on the back cover.
Watch Operation Guide 5659 ● Temperature ● ● Never leave your watch on the dashboard of a car, near a heater, or in any other location that is subject to very high temperatures. Do not leave your watch where it will be exposed to very low temperatures. Temperature extremes can cause your watch to lose or gain time, to stop, or otherwise malfunction. Leaving your watch in an area hotter than +60 °C (140 °F) for long periods can lead to problems with its LCD.
Watch Operation Guide 5659 ● Bacteria and Odor Resistant Band ● The bacteria and odor resistant band protects against odor generated by the formation of bacteria from sweat, which ensures comfort and hygiene. In order to ensure maximum bacteria and odor resistance, keep the band clean. Use an absorbent soft cloth to thoroughly wipe the band clean of dirt, sweat, and moisture. A bacteria and odor resistant band suppresses the formation of organisms and bacteria.
Watch Operation Guide 5659 Mobile Link Precautions Battery ● ● The special rechargeable battery used by your watch is not intended to be removed or replaced by you. Use of a rechargeable battery other than the special one specified for your watch can damage your watch. The rechargeable (secondary) battery is charged when the solar panel is exposed to light, so it does not require regular replacement as the primary battery requires.
Watch Operation Guide 5659 Before Getting Started... General Guide ① ② Watch Face and Display Indicators ① ② ③ This section provides an overview of the watch and introduces convenient ways it can be used. ⑦ ④ Watch Features ● Phone Linking The watch supports connection and communication with a Bluetooth capable phone. ● World Time Display the current time in any one of 38 time zones* around the globe. * Subject to being updated when connected with a phone.
Watch Operation Guide 5659 Navigating Between Modes Each press of (C) cycles between watch modes. ● In any mode, hold down (C) for at least one second to return to the Timekeeping Mode. Timekeeping Mode Cycling Between Timekeeping Mode Digital Display Contents Each press of (A) in the Timekeeping Mode toggles between the display information as shown below. Shifting Hands to Read the Digital Display Hand shift moves the hands out of the way for easy viewing of display information. 1.
Watch Operation Guide 5659 ● Low Battery Charging This watch runs on power supplied from a rechargeable (secondary) battery that is charged by a solar panel. The solar panel is integrated into the face of the watch, and power is generated whenever the face is exposed to light. A low battery will cause [L] and [LOW] to flash and will disable the functions below. ● ● ● Illumination Sounds (alarms, etc.
Watch Operation Guide 5659 ● Power Saving Function Leaving the watch in a dark location for about one hour between the hours of 10 p.m. and 6 a.m. will cause the display to go blank, and the watch to enter Level 1 power saving. If the watch is left in this condition for six or seven days, the watch will enter Level 2 power saving. Viewing the Face in the Dark Useful Features The watch has an LED light that you can turn on for reading in the dark.
Watch Operation Guide 5659 Linking with a Phone 4. Y Perform the operation shown on the screen of the phone to be paired with. When a connection is established between the watch and phone, [CNCT] While there is a Bluetooth connection between the watch and phone (Mobile Link), the watch’s current time setting is adjusted automatically. You can also change the watch’s other settings. and e will stop flashing and remain on the display.
Watch Operation Guide 5659 ● Triggering Immediate Time Adjustment The watch’s time setting will be adjusted automatically whenever you establish a connection between the watch and a phone. Whenever you want to trigger immediate time adjustment, perform the procedure below to connect with a phone. 1. X Enter the Timekeeping Mode. l Navigating Between Modes 2. Move the phone close to (within one meter of) the watch.
Watch Operation Guide 5659 ● Configuring the Summer Time Setting 1. Y Tap the “BABY-G Connected” icon. 2. X Hold down (C) for at least three seconds. Release the button when [CNCT] and e start to flash. ● Swapping Your World Time and Home Time 1. Y Tap the “BABY-G Connected” icon. 2. X Hold down (C) for at least three seconds. Release the button when [CNCT] and e start to flash.
Watch Operation Guide 5659 Configuring Watch Settings Phone Finder You can use phone finder to trigger a tone on the phone to make it easy to find. The tone is forced to sound even if the phone is in vibrate mode. Important! ● ● Do not use this function in areas where phone call tones are restricted. The tone sounds at a high volume. Do not use this function when listening to phone output over earphones. Alarm time, timer start time, and other settings can also be configured using BABY-G Connected.
Watch Operation Guide 5659 Recording Your Current Location (TIME & PLACE) While traveling or otherwise on the go, you can use the procedure below to record your current location, along with the time and date, on your phone. Recorded location information can be viewed on a BABY-G Connected map while the watch is connected with your phone. ● Recording Your Current Location 1. X Enter the Timekeeping Mode. l Navigating Between Modes 2. X When you are in the location you want to record, press (D).
Watch Operation Guide 5659 ● Deleting Pairing Information from the Time Adjustment Using Watch Operations to Adjust the Time Setting Your watch can connect with a phone to obtain information that it uses to adjust its date and time setting. If your watch cannot connect with a phone for some reason, you can use watch operations to adjust date and time settings. Watch 1. X Hold down (C) for at least one second to enter the Timekeeping Mode. 2. X Hold down (A) for at least two seconds.
Watch Operation Guide 5659 5. Use (D) to select a summer time setting. Each press of (D) cycles through available settings in the sequence shown below. ● ● ● 3. Keep pressing (C) until the setting you want to change is flashing. ● [AUTO] The watch switches between standard time and summer time automatically. [OFF] The watch always indicates standard time. [ON] The watch always indicates summer time. Each press of (C) moves the flashing to the next setting in the sequence shown below. 5.
Watch Operation Guide 5659 Using the Watch in a Medical Facility or Aircraft Whenever you are in a hospital, on an aircraft, or in any other location where connection with a phone may cause problems, you can perform the procedure below to disable auto time adjustment. To re-enable auto time adjustment, perform the same operation again. World Time World Time lets you look up the current time in any one of 38 cities around the globe, and UTC (Coordinated Universal Time). ● l Navigating Between Modes 2.
Watch Operation Guide 5659 Alarm Note ● ● While [UTC] is selected as the city, you will not be able to change or check the summer time setting. If you select a World Time City with BABY-G Connected and then change to a different city with a watch operation, the BABY-G Connected city information is deleted from the watch. l Configuring World Time Settings 4. Use (B) and (D) to change the hour setting. ● The watch will beep when an alarm time is reached. You can set up to five different alarms.
Watch Operation Guide 5659 Enabling the Hourly Time Signal 1. Enter the Alarm Mode. l Navigating Between Modes 2. Press (D) to display the hourly time signal screen ([SIG]). Moving to Another Time Zone Use the procedure below to easily change day and time settings of the watch to a destination location. ● Before Boarding Stopwatch The Stopwatch Mode lets you measure up to 60 minutes in one-second units.
Watch Operation Guide 5659 Measuring Elapsed Time 1. Enter the Stopwatch Mode. l Navigating Between Modes Minutes, seconds Measuring Lap Times 1. Enter the Stopwatch Mode. l Navigating Between Modes ● If a split time measurement operation is displayed, clear it before proceeding to step 2. l Measuring a Split Time Timer The timer counts down from a start time specified by you. A beeper sounds when the end of the countdown is reached. ● The beeper is muted when battery power is low. 2.
Watch Operation Guide 5659 Setting the Countdown Start Time The start time can be set in 1-second units up to 60 minutes. ● Using the Timer 1. Enter the Timer Mode. l Navigating Between Modes If a timer countdown operation is in progress, reset the timer to its current start time before performing this operation.
Watch Operation Guide 5659 Checking Reminder Details ● Checking reminders from tomorrow onwards The [REM] indicator appears on the display if you use BABY-G Connected to create a reminder that is after today’s date. Pressing (A) will switch the Timekeeping Mode screen to the REM display, which will show reminder item dates or days of the week, followed by their titles.
Watch Operation Guide 5659 Specifying the Day of the Week Language You can select any one of six languages for the day of the week display in the Timekeeping Mode. 1. Enter the Timekeeping Mode. l Navigating Between Modes 2. Hold down (A) for at least two seconds Use the procedure below to enable or disable the tone that sounds when you press a button. 1. Enter the Timekeeping Mode. l Navigating Between Modes 1. Enter the Timekeeping Mode. l Navigating Between Modes 2.
Watch Operation Guide 5659 Resetting Watch Settings This section explains how to return the watch settings below to their initial factory defaults. ● ● ● ● ● Watch Settings Reminders Other Information This section provides non-operational information you also need to know. Refer to this information as required. Stopwatch Timer City Table Alarm 1. Enter the Timekeeping Mode. l Navigating Between Modes 2.
Watch Operation Guide 5659 City Name London Paris Athens Tehran Sydney, Adelaide Summer Time Start Summer Time End 02:00, last 01:00, last Sunday in Sunday in March October 03:00, last 02:00, last Sunday in Sunday in March October 04:00, last 03:00, last Sunday in Sunday in March October 00:00, 00:00, March 22 September 22 or or 21 21 02:00, first Sunday in October 02:00, first Lord Howe Sunday in Island October 03:00, first Sunday in April 02:00, first Sunday in April 02:00, last Wellington Sun
Watch Operation Guide 5659 Copyrights and Registered Copyrights ● ● ● ● ● ● The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by CASIO Computer Co., Ltd. is under license. iPhone and App Store are trademarks of Apple Inc. in the United States and other countries. iOS is a trademark or registered trademark of Cisco Systems, Inc. GALAXY is a registered trademark of Samsung Electronics Co., Ltd.
Watch Operation Guide 5659 Q2 I can’t connect while my phone is in the Airplane Mode. Connection with the watch is not possible while the phone’s Airplane Mode is enabled. After disabling the phone’s Airplane Mode, go to the phone’s Home Screen and tap the “BABY-G Connected” icon. Next, on the watch, hold down (C) for at least three seconds. Phone-Watch Connection Q1 I can’t establish a connection between the phone and watch.
Watch Operation Guide 5659 Q3 Time is not displayed correctly. If your phone is unable to receive a signal because you are outside its service range or for some other reason, the watch may not be able to display the correct time. If this happens, connect the phone to its network and then adjust the time setting. Q4 Hands are out of alignment. Strong magnetism or impact can cause the hands to go out of alignment. Adjust hand alignment. l Adjusting Hand Alignment ● Q1 I don’t know what mode the watch is in.
