E Digital Camera EX-Z3 User’s Guide Thank you for purchasing this CASIO Product. Before using it, be sure to read the precautions contained in this User’s Guide, and keep the User’s Guide in a safe place for future reference.
INTRODUCTION INTRODUCTION Unpacking Check to make sure that all of the items shown below are included with your camera. If something is missing, contact your dealer as soon as possible. PHOTO Rechargeable lithium ion battery (NP-20) Camera Strap USB USB Cradle (CA-21) USB Cable CD-ROM CHARGE Basic Reference * The shape of the AC power cord plug varies according to country or geographic area.
INTRODUCTION 19 Contents GETTING READY About This Manual ..................................................... 19 2 General Guide ............................................................ 20 INTRODUCTION Camera USB Cradle Unpacking .................................................................... 2 Monitor Screen Contents ........................................... 22 Features .......................................................................
INTRODUCTION 43 Exposure Compensation (EV Shift) ........................... 61 BASIC IMAGE RECORDING Adjusting White Balance ............................................ 63 Recording an Image ................................................... 43 Recording Precautions About Auto Focus About the REC Mode Monitor Screen Adjusting White Balance Manually 45 46 46 64 Using the Best Shot Mode .........................................
INTRODUCTION Cropping an Image ..................................................... 84 PRINT Image Matching II .......................................... 101 Playing a Movie .......................................................... 85 Exif Print ................................................................... 101 Displaying the 9-image View ..................................... 86 Using USB DIRECT-PRINT .....................................
INTRODUCTION 118 USING A MEMORY CARD 139 Using a Memory Card ............................................... 119 To insert a memory card into the camera To remove a memory card from the camera Formatting a Memory Card Memory Card Precautions USING THE CAMERA WITH A COMPUTER Using the Album Feature ......................................... 139 119 119 120 121 Creating an album Selecting an Album Layout Configuring Detailed Album Settings Viewing Album Files Saving an Album Copying Files ............
INTRODUCTION 154 APPENDIX Menu Reference ....................................................... 154 Indicator Lamp Reference ....................................... 156 REC mode PLAY mode USB Cradle Indicator Lamps 157 158 158 Troubleshooting Guide ............................................. 159 Display Messages 162 Specifications ...........................................................
INTRODUCTION • The USB driver (mass storage) uses Phoenix Technologies Ltd. software. Compatibility Software Copyright C 1997 Phoenix Technologies Ltd., All Rights Reserved. • Other company, product and service names used herein may also be trademarks or service marks of others. • Photo Loader and Photohands are the property of CASIO COMPUTER CO., LTD. Except as stipulated above, all copyrights and other related rights to these applications revert to CASIO COMPUTER CO., LTD.
INTRODUCTION • Best Shot Simply select the sample scene that matches the type of image you are trying to record and the camera performs troublesome setups automatically for beautiful pictures every time. Features • 3.2 million Effective Pixels A high-resolution megapixel CCD provides 3.2 million effective pixels (3.34 million total pixels) for images that print beautifully.
INTRODUCTION • PRINT Image Matching II Compatible Images include PRINT Image Matching II data (mode setting and other camera setup information). A printer that supports PRINT Image Matching II reads this data and adjusts the printed image accordingly, so your images come out just the way you intended when you recorded them. • Alarm A built-in alarm helps to keep you on time for important events, and even can be used in place of an alarm clock.
INTRODUCTION • Never fire the flash while it is too close to the subject’s eyes. Intense light from the flash can cause eye damage if it is fired too close to the eyes. This is especially true with young children. When using the flash, the camera should be at least one meter (3.3´) from the eyes of the subject. • Keep the camera away from water and other liquids, and never let it get wet. Moisture creates the danger of fire and electric shock.
INTRODUCTION • Never use the AC adaptor to power any other device besides this camera. Never use any other AC adaptor besides the one that comes with this camera. • Never cover the AC adaptor with a quilt, blanket, or other cover while it is in use, and do not use it near a heater. • At least once a year, unplug the AC adaptor power cord from the power outlet and clean the area around the prongs of the plug. Dust build up around the prongs can create the danger of fire.
INTRODUCTION Operating conditions Condensation • This camera is designed for use in temperatures ranging from 0°C to 40°C (32°F to 104°F). • Do not use or keep the camera in the following areas.
INTRODUCTION LED Backlight Other • The monitor screen is illuminated by an LED backlight. A dark monitor screen indicates that the LED backlight has reached the end of its service life, and needs to be replaced by a CASIO authorized service center. Note that you will be charged for LED backlight replacement. The LED backlight brightness is reduced by half after about 1,000 hours of use. • The camera may become slightly warm during use. This does not indicate malfunction.
QUICK START GUIDE QUICK START GUIDE First, charge the battery! 1. Load the battery (page 25). 2. Place the camera onto the USB cradle to charge the battery (page 27). 1 • Note that the shape of the AC adaptor depends on the area where you purchased the camera. • It takes about two hours to achieve a full charge.
QUICK START GUIDE To configure display language and clock settings • Be sure to configure the following settings before using the camera to record images. (See page 39 for details.) 1. Press the power button to turn on the camera. 2. Press [ ] to select the language you want. 1 3. Press [SET] to register the language setting. 4. Use [ ], [ ], [ ], and [ ] to select the geographical PLAY REC MENU SET DISP 2, 3, 4, 5, 6, 7, 8, 9 area you want, and then press [SET]. 5.
QUICK START GUIDE To record an image To view a recorded image (See page 43 for details.) Green operation lamp 2 1 4 (See page 80 for details.) 2 1 99 1600 1200 NORMAL IN 1 / 1000 F2.6 PLAY 03/12 03 12/24 24 12:58 12 58 PLAY REC REC MENU MENU SET 3 SET Focus frame DISP DISP 3 1. Press the power button to turn on the camera. 1. Press the power button to turn on the camera. 2. Align the mode selector with “REC”. 3.
QUICK START GUIDE To delete an image (See page 94 for details.) 2 1 PLAY REC MENU SET DISP 3, 4, 5, 6 1. Press the power button to turn on the camera. 2. Align the mode selector with “PLAY”. 3. Press [ ] ( ). 4. Use [ ] and [ ] to display the image you want to delete. 5. Use [ ] and [ ] to select “Delete”. • To exit the image delete operation without deleting anything, select “Cancel”. 6. Press [SET] to delete the image.
GETTING READY GETTING READY ■ Button Operations This section contains information about things you need to know about and do before trying to use the camera. Button operations are indicated by the button name inside of brackets ([ ]). About This Manual ■ On-screen Text This section contains information about the conventions used in this manual. On-screen text is always enclosed by double quotation marks (“ ”).
GETTING READY General Guide The following illustrations show the names of each component, button, and switch on the camera.
GETTING READY ■ Bottom USB Cradle Simply placing your CASIO digital camera onto the USB cradle lets you perform the following tasks. • Battery charging (page 27) • Automatic transfer of images to a computer (page 124) • Viewing of images using the Photo Stand slideshow feature (page 92). G H I ■ Front G Battery cover H Connector I Tripod screw hole 12 3 * Use this hole when attaching to a tripod.
GETTING READY Monitor Screen Contents The monitor screen uses various indicators and icons to keep you informed of the camera’s status.
GETTING READY PLAY mode White balance indicator None Digital zoom indicator Folder number/ File number Auto Sunlight Shutter speed value Shade Light Bulb Image protection indicator • An out of range aperture or shutter speed causes the corresponding monitor screen value to turn amber.
GETTING READY Changing the Contents of the Monitor Screen Indicator Lamps You can find out the operational status of the camera and the USB cradle at a glance by checking the color of the indicator lamps, and whether a lamp is lit or flashing. For details, see “Indicator Lamp Reference” on page 156. Each press of the [DISP] button changes the contents of the monitor screen as shown below.
GETTING READY Attaching the Strap Power Requirements Attach the strap to the strap ring as shown in the illustration. Your camera is powered by a rechargeable lithium ion battery (NP-20). To load the battery PLAY REC 1. While pressing the battery cover on the MENU bottom of the camera, slide the cover in the direction indicated by the arrow, and then swing it open.
GETTING READY 2. While pulling the stopper in the direction 3. Swing the battery cover closed, and then slide indicated by the arrow in the illustration, align the arrow mark on the battery with the arrow mark on the camera and slide the battery into the camera. it in the direction indicated by the arrow. Stopper IMPORTANT! • Use only the special NP-20 rechargeable lithium ion battery to power this camera. Use of any other type of battery is not supported.
GETTING READY To remove the battery To charge the battery 1. Open the battery cover. 1. Connect the bundled AC adaptor to the [DC IN 5.3V] connector of the USB cradle, and then plug it in to a household power outlet. 2. Pull the stopper in the direction indicated by the arrow. • Note that the shape of the AC adaptor depends on the area where you purchased the camera. • This will cause the battery to come part way out of the slot. USB Cradle [DC IN 5.3V] Stopper AC Adaptor AC power cord 3.
GETTING READY NOTE NOTE • The bundled AC adaptor is designed for operation with any power supply in the range of 100V to 240V AC. Note, however, that the shape of the AC power cord plug varies according to country or geographic area.
GETTING READY IMPORTANT! • If the [CHARGE] lamp starts flashing red, it means that an error occurs while charging. An error can be caused by any of the following: a problem with the USB cradle, a problem with the camera, or a problem with the battery or how it is loaded. Remove the camera from the USB cradle and see if it works normally. • You can use the USB cradle to charge the camera’s battery, to exchange data with a computer over a USB connection, or when using the Photo Stand feature only.
GETTING READY ■ If the camera works normally ■ Battery Life Guidelines The battery life guideline values given below indicate the amount of time at standard temperature (25°C (77°F)) until power automatically turns off due to battery failure. They do not guarantee that the battery will provide the amount of service indicated. Low temperatures and continued use reduce battery life. 1. Continue using the camera until the current charge is used up, and then charge the battery.
GETTING READY ■ Tip to Make the Battery Last Longer • Recording one image per minute under the above conditions reduces battery life to about one sixth of that noted above. • The above values are based a new battery starting from a full charge. Repeated charging shortens battery life. • Battery life is greatly affected by how much you use flash, zoom and other functions, and how long you leave power turned on. If you do not need the flash while recording, select (flash off) for the flash mode.
GETTING READY • Failure to observe any of the following precautions while using the battery creates the risk of overheating, fire, and explosion. — Never use any other type of charger except the optional charger unit specified for the battery. — Never try to use the battery to power any other device other than this camera. — Never use or leave the battery near open flame. — Never place the battery in a microwave oven, throw it into fire, or otherwise expose it to intense heat.
GETTING READY ● PRECAUTIONS DURING USE • Should you ever notice leakage, strange odor, heat generation, discoloration, deformation, or any other abnormal condition while using, charging, or storing a battery, immediately remove it from the camera or optional charger unit and keep it away from open flame. • If the battery does not achieve full charge after the normal charging time has passed, stop charging. Continued charging creates the risk of overheating, fire, and explosion.
GETTING READY ■ USB Cradle and AC Adaptor Precautions ● BATTERY STORAGE PRECAUTIONS • Make sure you remove the battery when you do not plan to use the camera for a long time. A battery left in the camera discharges very small amounts of power even when power is turned off, which can lead to a dead battery or the need for longer charging before the next use. • Store the battery in a cool, dry place (20°C (68 °F) or lower).
GETTING READY • Make sure you always remove the camera from the USB cradle before connecting or disconnecting the AC adaptor. • Charging, USB data communication, and using the Photo Stand feature can cause the AC adaptor to become warm. This is normal and does not indicate malfunction. • Unplug the AC power cord from the power outlet whenever you are not using it. • Never place a blanket or any other cover on the AC adaptor. Doing so creates the risk of fire.
GETTING READY ● See page 37 for information about how to use menus. Configuring Power Saving Settings You can configure the settings described below to conserve battery power. Sleep : Automatically turns off the monitor screen if no operation is performed for a specified amount of time in the REC mode. Performing any button operation causes the monitor screen to turn back on. Auto Power Off : Turns off power if you do not perform any operation for a specified amount of time.
GETTING READY 2. Press [MENU]. Using the On-screen Menus Pressing [MENU] displays menus on the monitor screen that you can use to perform various operations. The menu that appears depends on whether you are in the REC mode or the PLAY mode. The following shows an example menu procedure in the REC mode. 1. Turn on the camera, and then align the mode selector with “REC” to enter the REC mode.
GETTING READY 3. Press [ ] or [ ] to select the tab you want, ● Menu Screen Operations When you want to do this: Do this: Move between tabs Press [ ] and [ ]. Move from the tab to the settings Press [ ]. Move from the settings to the tab Press [ ]. Move between the settings Press [ ] and [ ]. Display the options available for a setting Press [ ] or press [SET]. Select an option Press [ ] and [ ]. Register an option selection and exit the menu screen Press [SET].
GETTING READY 6. Perform one of the following operations to Configuring Display Language and Clock Settings apply the setting you configured. To do this: Perform this key operation: Apply the setting and exit the menu screen. Press [SET]. Apply the setting and return to feature selection in step 4. Press [ ]. Apply the setting and return to tab selection in step 3. 1. Press [ ]. 2. Use [ ] to move back up to tab selection.
GETTING READY IMPORTANT! To configure display language and clock settings • The camera’s clock settings are cleared whenever power is totally cut off. This can happen if the battery goes dead while the camera is not being supplied power by the USB cradle. The clock setting screen will appear automatically the next time you turn on power after the settings are cleared. Set the date and time before using the camera.
GETTING READY 3. Use [ ], [ ], [ ], and 6. Use [ ] and [ ] to [ ] to select the geographical area where you live, and then press [SET]. change the date format setting, and then press [SET]. Example: October 23, 2003 4. Use [ ] and [ ] to select the name of the city where you live, and then press [SET]. To display the date like this: Select this format: 03/10/23 YY/MM/DD 23/10/03 DD/MM/YY 10/23/03 MM/DD/YY 7. Set the current date and the time. 5.
GETTING READY 8. Press [SET] to register the settings and exit the setting screen.
BASIC IMAGE RECORDING BASIC IMAGE RECORDING 3. Compose the image This section describes the basic procedure for recording an image. on the monitor screen so the main subject is within the focus frame. Recording an Image 99 1600 1200 NORMAL IN 03/12 03 12/24 24 12 : 58 Your camera automatically adjusts shutter speed in accordance with the brightness of the subject. Images you record are stored in the camera’s built-in memory, or to a memory card if you have one loaded in the camera.
BASIC IMAGE RECORDING 4. Press the shutter release ● Operation Lamp and Focus Frame Operation button half way to focus the image. • When you press the shutter release button half way, the camera’s Auto Focus feature automatically focuses the image, and displays the shutter speed and aperture values. • You can tell whether the image is focused by observing the focus frame and the green operation lamp.
BASIC IMAGE RECORDING 5. After making sure that the Recording Precautions image is focused properly, press the shutter release button the rest of the way down to record. • The number of images that can be stored in memory depends on the resolution setting you are using (page 164). • Never open the battery cover or place the camera onto the USB cradle while the green operation lamp is flashing.
BASIC IMAGE RECORDING About Auto Focus About the REC Mode Monitor Screen • Auto Focus tends not to work well if the camera is moved during recording, or when recording the types of subjects listed below.
BASIC IMAGE RECORDING IMPORTANT! Using the Optical Viewfinder • The frame that is visible inside of the viewfinder indicates the image recorded at a distance of about one meter (3.3´). When the subject is closer than one meter, the recorded image will be different from what you see inside the viewfinder frame. • The monitor screen turns on automatically whenever you select the Macro mode or Manual Focus mode. Always use the monitor screen to compose images in these modes.
BASIC IMAGE RECORDING Using Zoom Your camera is equipped with two types of zoom: optical zoom and digital zoom. Optical Zoom Zoom out Zoom in The range of the optical zoom factor is shown below. Optical Zoom Factor Range: 1X to 3X 2. Compose the image and then press the shutter release button. 1. In the REC mode, press the zoom button to change the zoom factor. NOTES REC • The optical zoom factor also affects the lens aperture.
BASIC IMAGE RECORDING 5. Hold down the Digital Zoom Digital zoom indicator (Telephoto) zoom button to increase the optical zoom factor. Digital zoom is activated after you reach the maximum optical zoom factor (3X). It enlarges the part of the image at the center of the image screen. The range of the digital zoom factor is shown below. • When the digital zoom factor reaches its maximum value (3X), it stops momentarily.
BASIC IMAGE RECORDING IMPORTANT! Using the Flash • Digital zoom is disabled whenever the monitor screen is turned off (page 24). • Using digital zoom can cause degradation of the recorded image. Perform the following steps to select the flash mode you want to use. 1. In the REC mode, press [MENU]. 2. Press [왔] ( ) to select the flash mode. MENU • Each press of [왔] ( ) cycles through the flash mode settings shown below on the monitor screen.
BASIC IMAGE RECORDING To do this: Have the flash fire automatically when required (Auto Flash) ■ About Red-eye Reduction Select this setting: Using the flash to record at night or in a dimly lit room can cause red spots inside the eyes of people who are in the image. This is caused when the light from the flash reflects off of the retina of the eye.
BASIC IMAGE RECORDING Flash Unit Status Flash Precautions You can find out the current flash unit status by pressing the shutter release button half way and checking the monitor screen and red operation lamp. Take care that your fingers do not block the flash when you hold the camera. Covering the flash with your finger can greatly reduce its effectiveness. The indicator is also shown on the monitor screen when the flash unit is ready to fire.
BASIC IMAGE RECORDING • White balance is fixed while the flash is being used, so sunlight, fluorescent lighting, or other sources of illumination in the immediate area may affect the coloring of the recorded image. Using the Self-timer The self-timer lets you select either a 2-second or 10second delay of the shutter release after you press the shutter release button. A Triple Self-timer feature lets you perform three consecutive self-timer operations to record three images. 1.
BASIC IMAGE RECORDING To do this: 5. Record the image. Select this setting: Specify a 10-second self-timer 10 sec Specify a 2-second self-timer 2 sec Specify Triple Self-timer X3 Disable the self-timer Off Self-timer lamp • When you press the shutter release button, the self-timer lamp flashes and the shutter releases after the selftimer reaches the end of its countdown. • With the Triple Self-timer, the camera records a series of three images in the sequence described below.
BASIC IMAGE RECORDING NOTE Specifying Image Size and Quality • Use 2048 x 1536 when you plan to produce a large print of the image. Use 640 x 480 when you need to economize on space because you plan to send images in e-mail, etc. You can specify the image size and image quality to suit the type of image you are recording. To specify the image size 1. In the REC mode, press [MENU]. 2. Use [왗] and [왘] to select the “REC” tab. 3. Use [왖] and [왔] to select “Size”, and then press [왘]. 4.
BASIC IMAGE RECORDING NOTE To specify image quality • Use the “Fine” setting when image quality is your top priority and file size is secondary. Conversely, use the “Economy” setting when file size is your top priority and image quality is secondary. 1. In the REC mode, press [MENU]. 2. Use [왗] and [왘] to select the “REC” tab. 3. Use [왖] and [왔] to select “Quality”, and then IMPORTANT! press [왘]. • Actual file size depends on the type of image you record.