User's Manual

ManualsBrandsCasio ManualsClockCasio Casio Clock MA1205-EA

Operation Guide DQ-950S

MA1205-EA

ILLUSTRATION

2012 CASIO COMPUTER CO., LTD.

SNOOZE/LIGHT

ALARM

SET DEMO

RESET

SNOOZE

OFF

ALARM

SNOOZE

OFF

SET DEMO

5 6

MAX/MIN

RESET

SNOOZE/LIGHT

RESET

• A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the

clock.

• Depending on the clock model, the configuration of your clock may differ somewhat from that shown in the

illustration.

Current time

(Hour, minutes,

seconds)

Day of the week

Current Humidity Current Temperature

DATE

(month - date)

indicator

Alarm time

Snooze on

indicator

Alarm on

indicator

Alarm Off Snooze Alarm On

Summary of content (4 pages)

PAGE 1
MA1205-EA © 2012 CASIO COMPUTER CO., LTD. Operation Guide DQ-950S ILLUSTRATION 1 2 3 SNOOZE/LIGHT RESET MAX/MIN MAX/MIN 4 SET DEMO 8 SNO OZE /LIG HT ALARM SNOOZE ON 5 OFF 6 7 SET ALARM SNOOZE DEMO ON OFF RESET RESET • A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the clock. • Depending on the clock model, the configuration of your clock may differ somewhat from that shown in the illustration.
PAGE 2
Operation Guide DQ-950S GENERAL GUIDE USING THE CLOCK 1 SNOOZE/LIGHT button • Press this button to illuminate the display for about five seconds. • The SNOOZE/LIGHT button is the area at the top of the clock panel marked “SNOOZE/LIGHT”. • Pressing this button while the alarm is sounding stops the alarm. 1. Press the SET button (5) to cycle through the setting screens as shown below.
PAGE 3
Operation Guide DQ-950S USING THE ALARM THERMOMETER AND HYGROMETER FUNCTIONS The alarm sounds when the alarm time you set is reached. You can also use the Alarm Mode selector (8) to select the snooze alarm feature. A built-in sensor measures temperature and humidity, and shows the measured value on the display. The readout from the temperature sensor can also be switched between Celsius (°C) and Fahrenheit (°F).
PAGE 4
Operation Guide DQ-950S BATTERY REPLACEMENT Replace batteries whenever the display of the clock becomes dim and difficult to read. 1. Open the battery compartment cover as shown in the illustration. 2. Remove all of the old batteries. 3. Load a full set of new batteries. Make sure that their positive (+) and negative (–) ends face in the correct directions. If you load batteries incorrectly, they can burst and damage the clock. 4. Press the RESET button (7).