User's Manual

57
7
Click the [Close] button.
z This will cause the dialog box shown below to appear.
8
On the Data Projector’s remote controller, press the [

] key.
z This will cause the connection profile menu to appear in the projection area.
9
Use the [T
TT
T] key to move the highlighting to “Manual Connection 1” and then
press the [ENTER] key.
z This will display the dialog box shown below.
10
Press the [S
SS
S] key to move the highlighting to “Yes” and then press the [ENTER]
key.
z This will cause the message shown below to appear in the projection area.
11
Check the message that appears on the computer screen.
z When the computer finds the Data Projector, the display will change to a dialog box like
the one shown below for selecting the connected device.
Check to make sure that “Manual Connection 1
(Manual Connection Test)” is shown.
If there are other XJ-S35 Data Projectors with
wireless adapters connected in the area, all
of them that are detected will appear in the
list.