User`s guide

10 | CHAPTER 2: WINDOWS CE SETUP
STEP 6: Assign a Trigger Button
Follow the appropriate directions for your device and refer to your device’s
user documentation to assign a trigger button for the In-Hand Scan Card
(ISC).
Note: If SocketScan is not running yet, then pressing the assigned
trigger button is a quick way to launch SocketScan. Pressing the
trigger button will fire the laser only when SocketScan is open.
Pocket PC
These instructions are for a Pocket PC or Pocket PC 2002.
1. Go to Start | Settings | Personal | Buttons.
2. From the Button list, select a button to trigger the In-Hand Scan Card.
In the Button assignment field, select SocketScan. When done, tap ok.