User`s guide

18 | CHAPTER 3: CASIO BE-300 SETUP
Chapter 3 Casio BE-300 Setup
This chapter shows how to install, configure, and use the
In-Hand Scan Card (ISC) on a Casio BE-300 Cassiopeia
Pocket Manager.
Installation Steps Summary
STEP 1: Register the card.
STEP 2: Uninstall any bar code scanning software already on your device.
STEP 3: Install the software.
STEP 4: Insert the ISC.
STEP 5: Start SocketScan.
STEP 6: Assign a trigger button.
STEP 7: Start scanning data into a Windows program!
OPTIONAL: Configure prefix/suffixes
OPTIONAL: Configure sounds.
STEP 1: Register the Card
Register the card online at www.socketcom.com/product/prodreg.htm
You can also use the registration form included in the product package.
STEP 2: Uninstall Old Scanning Software
Delete any bar code scanning software you may already have installed on
your Casio BE-300.