User`s guide

20 | CHAPTER 3: CASIO BE-300 SETUP
STEP 4: Insert the ISC
Plug the ISC into the device’s CompactFlash I/O slot. The CF icon
should appear in the status bar at the bottom of the screen.
STEP 5: Start SocketScan
1. Go to Main | SocketScan.
2. Whenever SocketScan is running, either of two icons may appear in the
status bar of the BE-300.
In-Hand Scan Card detected
No scanning card detected
3. Make sure the “In-Hand Scan Card detected” icon appears. If the “no
card detected” icon appears instead, you may have improperly inserted
card. Remove and reinsert the card, pushing it in all the way.