User`s guide

CHAPTER 3: CASIO BE-300 SETUP | 21
STEP 6: Assign a Trigger Button
Note: If SocketScan is not running yet, then pressing the assigned trigger
button is a quick way to launch SocketScan. Pressing the trigger button will
fire the laser only when SocketScan is open.
1. Tap on the ISC icon at the bottom of the screen. In the pop-up
menu, select Enable Scan Buttons.
2. Press the key or button you wish to use as the trigger. You can use any
of the seven shortcut keys at the bottom of the screen or the Launcher
button (with the rocket icon). The laser should fire.
Note: You must assign a trigger button again after every time your
device enters Suspend mode or powers off.
Shortcut
keys
Launcher
button