User`s guide

CHAPTER 3: CASIO BE-300 SETUP | 23
Optional: Configure Prefix/Suffixes
SocketScan lets you specify prefix and/or suffix characters to be added
automatically to the data you scan. This helps to further eliminate manual
data entry.
1. Tap on the ISC icon in the task tray
.
Note: You can configure prefix/suffixes if the “no scanning card
detected” icon appears.
2. In the pop-up menu, select Prefix/Suffix...
3. In the Set Prefix/Suffix screen, enter the characters you want to be
appended to each scan (128 character maximum). Tap ok.
Optional: Configure Sounds
The SocketScan applet lets you choose whether or not you want a beep to
sound to indicate a successful scan.
1. Tap on the ISC icon in the task tray
.
2. In the pop-up menu, select Sounds...
3. In the Set Good-Read Sound screen, select a sound for indicating
successful scans. Tap OK.