User`s guide

24 | CHAPTER 4: WINDOWS 9x/Me/2000 SETUP
Chapter 4 Windows 9x/Me/2000
This chapter explains how to install the In-Hand Scan
Card on a Windows 9x/Me/2000 notebook.
This chapter features screen images from Windows 98.
Other Windows versions will have functionally
equivalent screens except where otherwise noted.
The ISC does NOT work with Windows XP or NT at this
time.
Installation Steps Summary
STEP 1: Register the card.
STEP 2: Uninstall any bar code scanning software already on your device.
STEP 3: Insert the installation CD.
STEP 4: Insert the ISC.
STEP 5: Configure Windows for new hardware.
STEP 5: Start SocketScan.
STEP 6: Assign a trigger button.
STEP 7: Start scanning data into a Windows program!
OPTIONAL: Configure prefix/suffixes
OPTIONAL: Configure sounds.
OPTIONAL: Configure SocketScan for specific symbologies or extensions.
STEP 1: Register the Card
Register the card online at www.socketcom.com/product/prodreg.htm
You can also use the registration form included in the product package.
STEP 2: Uninstall Old Scanning Software
Delete any bar code scanning software you may already have installed on
your mobile computer.