User`s guide

26 | CHAPTER 4: WINDOWS 9x/Me/2000 SETUP
STEP 5: Configure for New Hardware
1. Make sure the installation CD is still inside your computer.
2. Windows 2000: After you insert the ISC, a screen may appear reporting
Digital Signature Not Found. Click Yes.
3. The first time you insert the ISC, a new hardware or device driver
wizard will appear.
4. Follow the wizard to install the ISC drivers, making the appropriate
selection below as prompted:
a. Windows 95 — Select Other Locations... and specify your CD drive.
b. Windows 98 — Select Search for the best driver for your device.
In the next screen, select C
D-ROM drive.
c. Windows 2000
— Select Search for a suitable driver for my device.
In the next screen, select C
D-ROM drive.
d. Windows Me — Select Specify the location of the driver.
In the next screen, select Search for the best driver for your device,
and check Removable Media.
Important! For Windows Me, DO NOT select Automatic search for a
new driver!