User`s guide

CHAPTER 4: WINDOWS 9x/Me/2000 SETUP | 27
STEP 6: Start SocketScan
Go to Start | Programs | SocketScan.
Whenever SocketScan is running and the ISC is inserted, the ISC icon
should appear in the your device’s status bar.
The “no card detected” icon
may denote an improperly inserted card.
STEP 7: Assign a Trigger Button
Note: If SocketScan is not running yet, then pressing the assigned trigger
button is a quick way to launch SocketScan. Pressing the trigger button will
fire the laser only when SocketScan is open.
Follow these steps and refer to your Windows documentation to assign a
trigger button:
1. Right-click the ISC icon on your Windows task tray.
2. In the pop-up menu that appears, click Settings…
3. In the next screen, select a function key for the trigger button. Click OK.
Important!
Be careful not
to pick a key
used by
another
program!