User`s guide

6 | CHAPTER 2: WINDOWS CE SETUP
Chapter 2 Windows CE Setup
This chapter shows how to install, configure, and use
the In-Hand Scan Card (ISC) on any Windows Powered
Pocket PC (including Pocket PC 2002) or Windows CE-
based Handheld PC Pro, HPC 2000 or pen tablet.
This chapter shows Pocket PC 2002 screens. Other
Windows CE devices will have functionally equivalent
screens except where otherwise noted.
Installation Steps Summary
STEP 1: Register the card.
STEP 2: Uninstall any bar code scanning software already on your device.
STEP 3: Install the software.
STEP 4: Insert the ISC into Your Device.
STEP 5: Start SocketScan.
STEP 6: Assign a trigger button.
STEP 7: Start scanning data into a Windows program!
OPTIONAL: Select symbologies.
OPTIONAL: Configure prefix/suffixes.
OPTIONAL: Run Scan Demo application to scan unknown bar codes.
OPTIONAL: Configure sounds.
OPTIONAL: Manually configure specific symbologies or extensions.
STEP 1: Register the Card
Register the card online at www.socketcom.com/product/prodreg.htm
You can also use the registration form included in the product package.
STEP 2: Uninstall Old Scanning Software
Delete any bar code scanning software you may already have installed on
your mobile computer.