User`s guide

8 | CHAPTER 2: WINDOWS CE SETUP
Software Installation for Netscape Users
Follow these steps for software installation BEFORE inserting the ISC.
The SETUP.HTM file DOES NOT work with Netscape. Instead, you must
use the SETUP.EXE
file inside the SocketScan folder for Windows CE.
1. Make an active partnership between the mobile computer and host PC.
An active partnership exists if data can move between the host PC and
mobile computer via a serial/USB/Ethernet connection cable or cradle.
2. Insert the SocketScan Installation CD into your CD-ROM drive.
3. Use My Computer or Windows Explorer to access your CD-ROM drive
and open the SocketScanCE folder.
4. Inside the appropriate SocketScan folder, click on SETUP.EXE.
5. Follow the instructions that appear on your host computer screen until
setup is done.
6. Disconnect the mobile computer from the host computer.
7. Soft reset the mobile computer. Push the reset button, typically on the
back of the unit. Now you are ready to insert the ISC.